Handlebars

Our new Compact drops effectively raise the brake hoods, the levers are easier to reach, with small hands in particular. When riding on the hoods the horizontal forward part of the drop makes for an unbroken line with the hoods. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $190 for the Tune stem. For an extra $22.00 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!

The 5° backsweep makes for a compact and aerodynamic position. Our new Compact drops effectively raise the brake hoods, the levers are easier to reach, with small hands in particular. When riding on the hoods the horizontal forward part of the drop makes for an unbroken line with the hoods. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $189 for the Tune stem. For an extra $22 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!

For those, who enjoy our classic Modolo shape with straight middle part. With deep drops. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $190 for the Tune stem. For an extra $22 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!

Those, who have enjoyed our classic Modolo shape, now have the option, to use our new swept back middle part. With deep drops. The 5° backsweep makes for a compact and aerodynamic position. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $190 for the Tune stem. For an extra $22 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!

The obvious advantage of the oversized handlebar is its middle section’s larger diameter. This results in a considerably stiffer handlebar. In addition to that, its wide and flat top makes for an ergonomic and comfortable grip when riding with your hands on the tops. The flat section design is also more aerodynamic than the round-section version with its larger frontal area. With its drop and reach of 138 mm and 95 mm respectively, this handlebar is also designed with ergonomics in mind for both the drop and the hood position. In addition to that, the handlebar comes with recessed cable grooves on its underside. The radiuses of the side parts follow the well proven design of the compact series. The drops effectively raise the brake hoods, the levers are easier to reach, with small hands in particular. When riding on the hoods the horizontal forward part of the drop makes for an unbroken line with the hoods. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 353g - Note: Salt Flat bars are not compatible with bar ends

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)

The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 6061-T6 aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 357g (44cm)

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 321g - Note: Salt Flat bars are not compatible with bar ends

For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23-deg sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong, and durable, and great for long days bikepacking, touring, or shredding singletrack. - Constructed using double-butted, AL-7050-T76 aluminum - Bar sweeps forward, then back, to preserve stem length - 5-deg upsweep allows adjustment to suit personal preference - Bar can be flip-flopped to run up or down - Graduated ends for easy trimming - Bead-blast black finish

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends

The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 7050-T6 series aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 281g (44cm)

The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 7050-T6 series aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 293g (44cm)

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 189g - Note: Salt Flat bars are not compatible with bar ends

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars - Weight: 221g - Note: Rustler bars are not compatible with bar ends

Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position, while the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position and the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter

Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.

Fast, light, sporty and agile. Who would have thought that the SQlab ergonomics experts are also quite good in high-tech, material science and carbon manufacturing. - Stability: Syntace and SQlab are the only manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Ergonomics: With a sporty sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for sporty MTB handlebars. - Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. - Area of use: Marathon, Cross Country and Trail bikes with sporty sitting position and under 130mm suspension. The pictured stem is not included in the scope of delivery. The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - Area of use: MTB race - Width: 740mm - Shortened maximum width: 720mm - Backsweep: 16° - Upsweep: 4° - Material: carbon - Clamping: 31.8mm - Downsweep: 0° - Stretch: 0mm

- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g

Whether it's a classic MTB build or a sophisticated townie, the high-polish silver finish of the Ritchey Classic Flat bar is a beautiful finishing touch to tie any build together. - Material: double-butted 6061 alloy - Width: 560mm - Backsweep: 5° - Rise: flat - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 221g

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g