Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

$599.00
Taking cues from the legendary Ritchey Bullmoose mountain bike bar, as well as more recent Ritchey road combo bars such as the SoloStreem and MonoCurve, the SuperLogic Butano Ridge fills the demands of adventurous riders calling for a carbon fiber version of the Butano. We’ve doubled down on the original concept of the Butano by blessing it with the SuperLogic treatment and delivering an integrated bar/stem combo that is lightweight, stealthy, and more than capable of handling the rough stuff when it turns into fast rough stuff. This magnificent monocoque carbon fiber beauty offers complete internal cable/wire/hose routing for modern gravel and road bike frames. The underside of the bar features a removable cable cover offering easy access for cable routing and doubles its duty with the ability to receive an integrated accessory mount (sold separately). The breathtaking aesthetics of the Butano Ridge are well complimented by its supreme comfort and control afforded by its shallow drop, short reach, and pleasant backsweep – as well as the ergo aero tops that deliver logical ergonomics.
$399.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
$390.00 $520.00 25% Off
Replacement stem for the 2018+ Giant Propel - -8 Degree rise - Composite stem and cover Includes: - Stem - Cover - Top Cap - Hardware - Di2 plugs
$349.99
- Compatible with Giant's proprietary Overdrive Aero steerer tube - Ultra-light carbon composite reduces weight while optimizing the aerodynamic shape - Integrated aero shape achieves maximum stiffness while attaining low weight - Simplified cable management hides all the cables underneath the stem - Weight (g)133/138/143/148/153/158/163/168 - Length (mm)80/90/100/110/120/130/140 - Angle±10° - Bar Clamp Dia. (mm)31.8 - Stack Height (mm)40
$315.00 - $320.00
ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°). FEATURES - Compatible with all Giant OD1 and OD2 head tubes sizes - Available in ±10° and ±20° angles - Available in eight lengths from 70 to 140mm - Purpose-engineered shaping achieves maximum stiffness and lowest weight - Integrated aero silhouette from stem cap to spacers
$319.99
ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
$279.99 - $299.99
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree
$279.99 - $299.99
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
$279.99 - $299.99
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g
$299.99
Engineered exclusively for OverDrive Aero steerer tubes, the Contact SLR AeroLight is an ultralight and stiff composite stem that offers aero-enhancing integration, easy-to-adjust cable management, and sleek looks. FEATURES: - Works with OverDrive Aero steerer tubes only - Integrated aero design unifies the top cap, cables, and spacers with the head tube for improved aerodynamics - Ultra-light composite design delivers maximum stiffness at a superlight weight - Intuitive design guides all cables under and inside for optimized aerodynamics and sleek looks. - Fits current generation Contact Aero or Contact D-Fuse handlebars - Available in eight lengths from 80mm to 140mm SPECIFICATIONS - Weight: 123g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch - Stack Height: 44mm
$285.00
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately
$285.00
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately
$264.99
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
$249.99
The new ShockStop PRO Stem blends seamlessly with the aesthetic of modern bikes, while reducing fatigue and strain. Along with the ShockStop Suspension Seatpost, this system works together to suspend the rider and smooth out rough terrain on the bike you already own, making your ride smoother, faster, and more comfortable. Benefits: - Go further—reduce fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control over rough terrain - GPS and Utility Mounts sold separately Details: - Titanium Hardware - 15% Reduction in Weight over standard ShockStop - Refined premium finish - The ShockStop Stem in available in +/-6 degree angle with 80mm, 90mm, 100mm, 110mm, and 120mm lengths - Effective suspension travel: up to 20mm - Includes 5 swappable elastomers to fine tune your riding style - Check technical specs for compatibility What's in the Box: - 1 x ShockStop PRO Stem - 5 x swappable elastomers (2 pre-installed, 3 additional in box) - All required hardware
$249.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
$224.99 - $239.99
- Stiff, ultra-light, full-composite oversize box-section increases torsional stiffness with tuned vertical compliance - 46mm wide alloy faceplate - Titanium hardware - Recessed top cap and semi-integrated spacer maximizes stem to steerer contact - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
$233.59
- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm
$189.99
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
$189.99
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
$184.99
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
$179.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
$179.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
$161.30 $215.00 25% Off
Replacement stem for the 2018+ Giant Propel - -8 Degree rise - Alloy stem - Composite cover Includes: - Stem - Cover - Top Cap - Hardware - Di2 plugs
$159.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
$149.99 - $150.00
Waste not, want KNØT. Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake. Where it thrives: The open road, up and down hills What it's built for: Aerodynamics, control Highlights: - One-piece looks, two-piece function - Wind tunnel proven, hides cables - Compatible with 2019+SuperSix EVO
$150.00
System = speed. Paired with the SAVE or KNØT SystemBar, you end up with the speed and good looks of a one-piece system with the adjustability of a two-piece. Where it thrives: The open road, up and down hills What it's built for: Aerodynamics, efficiency Highlights: - Integrated computer mount - Compatible with most bicycles - One-piece looks, Two-piece function
$142.00
Zipp's Service Course SL OS Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Wide range of sizes and angles. - Service Course SL OS stem made for 1-1/4" steerer tube bikes. Ships with shims for 1-1/8" steerer tubes - Zipp Quickview integrated computer mount available separately - Lifetime warranty
$141.00
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)
Page 1 of 7 Next page