Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8-inch x 2.5mm Bag of 5
$2,222.22
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers
CeramicSpeed 3D-Printed Ti OSPW System for SRAM eTap
$1,700.00
Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a huge technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings over OEM pulleys start at 40%, and the CeramicSpeed Bearings inside guarantee 3-5 times greater longevity compared to commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. - The overall power savings of the OSPW System for SRAM eTap commonly reach 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. - The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12 speed SRAM eTap AXS. - This 3D-printed titanium version of the OSPW System comes with our CeramicSpeed Coated Bearings for even longer service life and lower friction. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet - IMPORTANT: When traveling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit safely in most bike travel bags and could be damaged if left on.
THM-Carbones Clavicula Carbon Compact Crankset
$1,599.99
The "Clavicula Compact" is the compact version of our super light race crankset, enabling you to use smaller chainrings. Technically identical with the standard “Clavicula”, it maintains the same record-breaking stiffness-to-weight ratio. Typical chainring combinations used with compact cranks are 34/48 or 36/50. While giving similar gear ratios to triple cranks, the smaller chainrings found on compact cranks yield a better chainline, better shifting and fewer doubled gears. In addition, the shorter spindle allows a greater lean angle in right hand turns. And last but certainly not least, many riders simply enjoy the compact crank’s better looks compared to triple cranks. As with our “Clavicula” the cranks are delivered without chainrings. The bolt circle diameter is a standard 110mm. A bottom bracket and mounting tools are supplied with the cranks.
THM-Carbones Clavicula Carbon Crankset
$1,599.99
The “Clavicula” is a revolutionary new design of an all-carbon crank. They are designed in close cooperation with the Cologne-based design-specialist formagic. New production methods, never before used for cranks, achieve a giant leap in total stiffness. The crank’s stiffness-to-weight ratio is setting new standards. In-house lab testing of various high-end cranks shows the superior performance of our crank system. The cranks are designed for road bike applications with a 130 mm or 110 mm bolt circle diameter and for 68 mm bottom bracket width. 170mm, 172.5 mm and 175 mm crank arms available. The sealed bearing bottom bracket attaches outside of the frame using the standard BSA threads. This design allows the use of larger diameter bearings and a wider bearing placement. In combination with the 30 mm diameter axle these modifications make for a very stiff drivetrain. Optional BB shells for Italian threaded frames now available upon request. Furthermore an adaption for the BB30 and the specialized system are available. Extensive testing of this ground-breaking invention was our top priority. We are currently undertaking various long term and stress tests, because as a pure-bred racing component the “Clavicula” must be able to continually withstand highest loads – be it in hard sprints or during the toughest classics. Both static and dynamic tests have been completed successfully. However, to aviod even the slightest risk we are currently setting a rider weight limit of 95 kg (207 lbs.). Your safety is our main priority!
THM-Carbones Clavicula Carbon MTB Crankset
$1,599.99
Uphill every gram counts. Thus, this is what we paid attention to when developing our super-light and stiff “Clavicula MTB” for mountain bikers. The result of a long period of development and uncountable test runs, we present what may be the world’s best MTB racing crank. At only 440 g including BB bearings and spindle the “Clavicula MTB” is lighter than any competitor and therefore impossible to beat on demanding terrain where you have to fight you way to victory over countless grinders. Aside from the seconds the lower mass shaves off your lap times, it also improves handling of the entire bike. Technical sections become easier to master – the “Clavicula MTB” puts you ahead of the pack As the regular “Clavicula” the new crank is shipped without chainrings, allowing you to choose any set with the common 104/64 mm BCD. The granny with its 64 mm BCD must be 22 teeth or larger. The crank comes complete with bottom bracket and mounting tool.
Fox Racing Shox 38 E-Optimized Factory Series GRIP2 27.5-inch
$1,249.00
The hard hitting, long-travel enduro specialist. When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long-travel single-crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. "Factory" says it all—feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring floating axle, new arch design, and lower leg bleeders to release built-up pressure. - 44mm offset - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount - 27.5-inch: 723mm peak tire diameter
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Garmin Rally XC200 Dual-Sensing Power Meter
$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
FSA PowerBox Carbon Road Crankset
$1,189.99
FSA’s Road PowerBox Carbon Crankset employs a P2M convertible spider design for multiple chainring options. FSA's hollow carbon arms and BB386EVO spindle mated together produce a very lightweight, extremely versatile power meter crankset available with a double chaining configuration. Software upgrades are available for even more features. - Hollow carbon arms with UD carbon finish - BB386EVO 30mm AL 7050 alloy spindle fits every frame (purchase BB separately) - AL7075 CNC chainrings - AL7075 Torx T-30 alloy chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Spider-based power sensors provide total power output measurement of both legs, with Left & Right leg output analysis available with system upgrade - Bluetooth connectivity available with system upgrade - Battery life is approximately 300-400 hours - Easy-to-replace CR2450 battery
THM-Carbones Scapula SP Carbon Fork
$1,149.99
The “Scapula SP” answers the racers’ call for the lowest weight possible. At only 260 g the “Scapula SP” sets the limit of what is currently technically achievable. No other fork reaches the same low weight while providing unlimited racing performance with uncompromised safety. “Scapula SP”: SP is short for ‘sine pondere’, Latin ‘without weight’. Safety was our top priority during all stages of the design process despite all attention to weight. The “Scapula SP” underwent the same rigorous in-house and independent testing procedures as our regular fork. It came out after simulations of more than 100,000 km strong as on the first day. The fork’s stiffness is by far greater than average. Lateral stiffness, important for hard sprints and precise cornering, remains very high despite the low weight. For more detailed information read our » test reports section. Despite the superior stiffness we limit rider weight to 85 kg (187 lbs). Up to this limit the fork is ready to meet any challenge put out by road racing. We recommend the “Scapula” model for heavier riders. Comfort of the “Scapula SP” is improved a bit compared to the extremely stiff regular model. As comfort can only be had at the cost of reduced brake stiffness we chose to remain conservative. The “Scapula SP” is a pure-bred race fork with high shudder resistance. The secret behind the performance of the “Scapula SP” lies in the continuous carbon fibers all the way from the steerer down to the dropouts. Even the dropouts have a carbon fiber core. The wall thickness of steerer and fork legs varies continuously to provide an optimal stiffness-to-weight ratio. The elliptical interior shape is perfect to take on both large forces from direct-on hits as well as side loads. Minute attention to detail during the optimization process lead to sensationally low weight combined with superior stiffness.
Garmin Rally RK200 Dual-Sensing Power Meter
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
Garmin Rally RS200 Dual-Sensing Power Meter
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation
Ciamillo Gravitas
$999.99
A quality of substance or depth; specifically dignity, seriousness, and duty. One of several virtues that ancient Roman society expected men to possess. In the beginning there was Zero Gravity, the spearhead of lightweight. Now, new life has risen, destroying all in its path with bone-crushing power. Prepare for the tyrannical rule of the highest performing brake on the planet. Behold the ultimate supremacy. The Gravitas. Coming soon. Set Weight: TBDg (pair)
RockShox ZEB Ultimate
$999.00
ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages—this fork has a stiff, 38mm chassis designed with the Charger 2.1 damper, DebonAir spring technology, SKF Wiper Seals, and Maxima Plush Fluid. It pairs our highest performing, athlete-proven technologies with premium style. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger 2.1 RC2 damper features independent high and low-speed compression adjustments - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
Campagnolo Super Record Carbon Crankset
$985.00
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
Shimano Dura-Ace R9170 Di2 Hydrualic Disc Brake/Lever Set
$649.99 - $970.99
Shimano dual control hydraulic disc brake levers. - More controllable and confidence in race condition - Optimally balanced hydraulic brake system for racing - Dedicated brake lever shape, stroke, contact point, stiffness and dedicated shift paddles - Lightweight - Carbon composite plastic material of hood - More intuitive, quicker shifting operation - More defined click feeling and ergonomic shift lever position - Customizable function to fit any riding style - Each switch has the option for multi-shift ON or OFF - E-TUBE project - Optimum power transmitted with grip firmly - Ideal ergonomic cover shape with better thickness & tenderness - Openable hood cover - Simple set up and maintenance - Easy replace hood cover - Openable hood cover - Customizable the function to fit in rider's riding style
Campagnolo Super Record 12x2 Speed Crankset
$964.99
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
RockShox Lyrik Ultimate
$949.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
Profile Design Aeria Evo
$936.00
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
Zipp Vuka Aero
$900.00
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately
Schmolke Carbon Oversize-Compact TLO
$849.99
The obvious advantage of the oversized handlebar is its middle section’s larger diameter. This results in a considerably stiffer handlebar. In addition to that, its wide and flat top makes for an ergonomic and comfortable grip when riding with your hands on the tops. The flat section design is also more aerodynamic than the round-section version with its larger frontal area. With its drop and reach of 138 mm and 95 mm respectively, this handlebar is also designed with ergonomics in mind for both the drop and the hood position. In addition to that, the handlebar comes with recessed cable grooves on its underside. The radiuses of the side parts follow the well proven design of the compact series. The drops effectively raise the brake hoods, the levers are easier to reach, with small hands in particular. When riding on the hoods the horizontal forward part of the drop makes for an unbroken line with the hoods. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!
SRAM RED AXS Power Meter Upgrade Kit
$819.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB
Schmolke Carbon Compact-0° TLO
$809.99
Our new Compact drops effectively raise the brake hoods, the levers are easier to reach, with small hands in particular. When riding on the hoods the horizontal forward part of the drop makes for an unbroken line with the hoods. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $190 for the Tune stem. For an extra $22.00 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!
Schmolke Carbon Compact-5° TLO
$809.99
The 5° backsweep makes for a compact and aerodynamic position. Our new Compact drops effectively raise the brake hoods, the levers are easier to reach, with small hands in particular. When riding on the hoods the horizontal forward part of the drop makes for an unbroken line with the hoods. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $189 for the Tune stem. For an extra $22 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!
Schmolke Carbon Ergo-0° TLO
$809.99
For those, who enjoy our classic Modolo shape with straight middle part. With deep drops. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $190 for the Tune stem. For an extra $22 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!
Schmolke Carbon Ergo-5° TLO
$809.99
Those, who have enjoyed our classic Modolo shape, now have the option, to use our new swept back middle part. With deep drops. The 5° backsweep makes for a compact and aerodynamic position. Our TLO series is manufactured to suit your weight and riding style using the best carbon fibre prepeg available (material). This, together with a further refined layering plan with less layers, results in yet another reduction of weight. The middle part of the handlebar is designed to work without the support of an aluminium tube. The effective diameter is 25.9 mm, hence stems from 25.8 mm to 26 mm clamping diameter may be used. All our handlebars are designed to work with 4-bolt stems. These thin walled handlebars may be completed with our custom made oversize carbon bar plugs. Ordering Keep in mind that we measure our road bars from the outside to the outside. Our handlebars as standard are not made to be used with triathlon or time trial bars. If you want to use one of our bars with aero bars, please say so when placing the order. The necessary strengthening will add some 8 g to the bar’s weight (compare special handlebars). For our 25.9 mm handlebar we recommend the Ritchey WCS stem with titanium screws (98 g/110 mm) or the stiffer, albeit slightly heavier, Tune stem. If you want us to ship either of these together your handlebar add $70 for the Ritchey or $190 for the Tune stem. For an extra $22 we will add 6 titanium screws for the Ritchey stem. If desired, we can also custom make your bar with long ends. All our bars may be shortened at their ends by 10 mm. Trade customers, as a rule, are supplied with standard bars, that’s no time trial bar reinforcement and short bar ends. Fitting Mount the bar with the lower straight parallel to the floor. Tighten the stem bolts with a maximum torque of 5 Nm (not over 3.5 Nm with a Syntace F99 stem)! If you use our fitting paste supplied, the particles it contains will increase friction between bar and stem. A torque lower by 1.5 Nm will suffice to clamp the bar. This brings the recommended torque down to 3.5 Nm, which will reduce the forces on the bar. All torque figures are for greased bolts only. For dry bolts add 1 Nm to the recommended figures. The bars are reinforced in the areas where the shifters sit, hence the levers’ bandages may be tightened with up to 4 Nm. Use our mounting paste again!
RockShox ZEB Select
$799.00
The ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance anywhere you need it to be. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper features low-speed compression adjustment - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise
RockShox ZEB w/Dual Position Air Spring
$799.00
The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance. - New, 38mm chassis for increased stiffness and rider confidence - New, price point Charger R cartridge damper featuring an easy-to-adjust damper with only rebound adjustment - Dual Position Air adjustment to change the geometry of the bike for climbs and descents - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise
Marzocchi Bomber Z1 Coil Suspension Fork
$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm
Quarq DZero Power Meter Spider for Specialized
$779.00
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
Page 1 of 113 Next page