More than 20 years ago, BoXXer changed the DH world when it hit the scene. Featuring Charger 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral. - Completely re-designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high- and low-speed compression adjust - Highly tunable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
Saving every dime for your bike park pass? Keep it in the bank, BoXXer Select is built on the same great chassis as BoXXer Ultimate and features the DH-specific DebonAir air spring. Race-proven Maxima Plush fluid and the Charger RC damper offer out-of-the-boXX performance with low-speed compression and rebound adjustment. - Charger RC damper featuring low-speed compression adjust - Highly tunable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and silences damper noise
The “Scapula SP” answers the racers’ call for the lowest weight possible. At only 260 g the “Scapula SP” sets the limit of what is currently technically achievable. No other fork reaches the same low weight while providing unlimited racing performance with uncompromised safety. “Scapula SP”: SP is short for ‘sine pondere’, Latin ‘without weight’. Safety was our top priority during all stages of the design process despite all attention to weight. The “Scapula SP” underwent the same rigorous in-house and independent testing procedures as our regular fork. It came out after simulations of more than 100,000 km strong as on the first day. The fork’s stiffness is by far greater than average. Lateral stiffness, important for hard sprints and precise cornering, remains very high despite the low weight. For more detailed information read our » test reports section. Despite the superior stiffness we limit rider weight to 85 kg (187 lbs). Up to this limit the fork is ready to meet any challenge put out by road racing. We recommend the “Scapula” model for heavier riders. Comfort of the “Scapula SP” is improved a bit compared to the extremely stiff regular model. As comfort can only be had at the cost of reduced brake stiffness we chose to remain conservative. The “Scapula SP” is a pure-bred race fork with high shudder resistance. The secret behind the performance of the “Scapula SP” lies in the continuous carbon fibers all the way from the steerer down to the dropouts. Even the dropouts have a carbon fiber core. The wall thickness of steerer and fork legs varies continuously to provide an optimal stiffness-to-weight ratio. The elliptical interior shape is perfect to take on both large forces from direct-on hits as well as side loads. Minute attention to detail during the optimization process lead to sensationally low weight combined with superior stiffness.
The award-winning 36 with FIT GRIP2 4-way adjustable damper features patent-pending Variable Valve Control (VVC) high- and low-speed rebound adjuster, improved compression damping, and less friction overall. With all this and the legendary Fox feel, the 36 offers a level of performance and adjustability sought by today's riders. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra durable Genuine Kashima Coat. These products are World Cup proven. Buttery smooth Kashima's distinctive gold color is backed by its high performance attributes—properties that provide an exceptionally smooth feel and extreme durability. GRIP2 — Next-Generation Sealed Cartridge FIT Damper GRIP2 is our next-evolution sealed cartridge FIT system, our highest performing gravity-focused damper. The new damper shares its roots with the original GRIP architecture, but has been seriously enhanced with all-new technology: 4-way adjustability, VVC high-speed rebound circuit, high-performance mid-valve, and overall friction-reducing treatments. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust - Charger 2.1 RCT3 damper featuring 3-position compression adjust (open/pedal/firm) with low-speed compression adjust - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package
For all the ups, downs and to get you to everything in between. Lyrik Select combines an updated DebonAir air spring with the trusted Charger RC damper for unmatched trail control and precision. Maxima Plush fluid reduces friction, silences noise, and provides all-around lasting performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise
The forks made by THM-Carbones are the pinnacle of evolution of modern carbon fiber forks. In terms of weight, brake stiffness, and steering precision the “Scapula” and her sister, the “Scapula SP”, set the new standard for professional racers as well as any other performance-oriented cyclist. Due to their extremely low weight (as low as 235 g / 0.52 lbs) and exceptional stiffness, these forks are the right answer to the enormous demands of modern road racing. The “Scapula” forks allow you to greatly reduce the weight of your machine, improving your performance considerably. Be it in tight crits or screaming downhills – the “Scapula’s” unparalleled cornering precision and stiffness under braking loads are confidence inspiring. The higher your speed and the tighter the perfect line, the more a “Scapula” fork will help you to set a new P.R. – including a safe return home! A look at the stiffness-to-weight ratio will convince you: The “Scapula’s” STW-score is about twice as high as that of ordinary carbon fiber forks. For more details go to » test reports. Compared with the “Stiletto”, which we designed and built for Storck Bicycles, we have changed the fork’s geometry slightly, further improving stiffness and reducing weight. Or lightest “Scapula SP” weighs only 235 g (0.52 lbs).
A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig. - Material: Carbon - Weight: 748g - Steer Tube length: 350mm - Rake: 42mm, 51mm (adjustable) - Axle To Crown: 488.8mm - Max Rotor Size: 160mm - 203mm - Max Tire Clearance: 5.2-inch - Crown Race Diameter: 1.5-inch - Torque Spec – Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application. - Material: Carbon Fiber - Steerer Tube Length: 300mm - Rake: 44, 52 Adjustable - Axle to Crown: 470mm - Brake: Disc - Max Rotor Size: 180mm - Max Tire Clearance: 3.4-inch - Crown Race Diameter: 1.5-inch - Torque Spec: Steer Tube: 5.5 Nm - Torque Spec: Axle: 8Nm - Weight: 711g (w/ fender), 686g (w/ clasps)
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
• Specially formed blades provide precision handling and superb vibration damping • Designed to work with either integrated headsets or standard headsets • Integrated crown race • Monocoque construction • One of the lightest cyclocross forks on the market • Available in 45mm crown diameter • Blade: Carbon • Crown: Carbon • Steerer: Carbon • Steerer Length: 300mm • Steerer Diameter: 1-1/8" • Rake: 45mm • Blade Shape: Curved • Drop out: Carbon • Crown Diameter: 45mm • Integrated 45 degree crown race • Axle-to-Crown: 395mm • Finish: Matte UD Carbon • Weight: 448g (w/ uncut steerer) • Brake mount: Canti • Compression plug included
Finely tuned ride feel—laterally and torsionally stiff with just the right amount of give to smooth out roots and rock gardens. - One piece carbon crown and steer tube section with molded legs - Full carbon dropouts and brake mount - Suspension-corrected axle-crown height based on 100mm suspension fork - Blade/Crown/Dropout: Carbon - Steerer: Tapered carbon - Steerer Length: 300mm - Steerer Diameter: 1-1/8" - Rake: 45mm - Brake Mount: Post - Axle-Crown: 470mm - Crown Diameter: 61mm - Matte UD carbon finish - Weight: 672g
The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm
The ultimate carbon fiber disc brake compatible cyclocross fork. ENVE created this fork because we love cyclocross racing and gravel road adventures. Like all ENVE products, this fork was developed from a desire to improve the ride experience. In this case they knew that a thru-axle would make for a better tracking and braking front end. A quiet ride is also a priority, so the addition of a thru-axle means less rotor rub and caliper adjustments. Because the majority of time isn’t spent racing under UCI rule, they made this fork compatible with high volume tires — you can run up to a 45mm (1.9-inch) tire with a 700c wheel and up to a 50mm (2.0-inch) tire if you are running 650B. Using our proprietary molding methods, the thru axle disc cyclocross fork offers the ultimate in cyclocross and gravel road bike performance. From steerer tube to dropout the forks are constructed in one piece, which equates to a very efficient structure that yields a lightweight and highly durable product. The front thru-axle diameter is optimized for road and cyclocross disc applications at 12mm. Whether you are racing on the World Cup cyclocross circuit or riding gravel events like the Crusher or Dirty Kanza, the ENVE thru-axle cyclocross disc fork is designed to perform in these environments. - 1-1/8 – 1.5-inch tapered steerer
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
The Makwa fork is Salsa's fat bike race fork. Lightweight and stripped of extras, its thru-axle design boosts stiffness and aids in solid tracking on the trail. This fork is spec’d on Salsa's 2014 Beargrease bikes, and is also fully compatible with their 2014 Mukluk frames. - Axle-to-Crown Length: 483mm - Brake Type: Disc - Brake Usage F/R: Front - Color: Black - S.H.I.S. Crown Race Diameter: 40 - Fork Rake: 51mm - Front Axle Type: 15mm thru - Front Axle Size: 15 x 171L, TP=1.5, TL=10 - Front Hub Spacing: 142mm - Material: Carbon - S.H.I.S. Clamp Diameter: 28.6 - Steerer Tube Length: 260mm - Steerer Type: Tapered - Weight: 720g - Compatible with all 26 x 4.0–5.0" tires and 29+ tires
Stiff yet plush, Ritchey's WCS Carbon Mountain Fork soaks up the bumps and makes those tough climbs just a bit flatter. It's as light as it is tough thanks to the one-piece carbon crown and steer tube section, not to mention full carbon dropouts. It's suspension-corrected so it fits on most modern mountain bike frames, too. Enjoy the lateral stiffness of the carbon construction when you're grinding up tough singletrack, and let the vibration damping do the work on the way down to keep you comfy all ride long.
Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included
Page 1 of 3 Next page