Cranksets

The Box Three Crankset features a hollow-forged 2-piece design with an oversized bottom bracket interface. The 24mm spindle is pressed into the drive-side crank arm for durability and easy installation. The non-drive side crank arm features a 2-bolt pinch system for added strength. Our unique 4-bolt 104 BCD spider features a flex-resistant ring for optimum performance. Box Three Cranks feature steel pedal inserts that require pedal washers and externally sealed bearing BSA bottom brackets, both provided in the box. FEATURES - Hollow Forged Design - Dual Pinch Bolts for Even Clamping Force - Spider with Flex-Resistant Ring COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two 24mm bottom bracket - Box Extremum RacePrep bottom bracket

All Box One and Two cranksets are engineered and crafted using our Oversized Technology. we all know that there is no use pushing hard on your pedals if you can’t deliver most of that power to the rear wheel. During the creation of our cranks, we were obsessed with Power delivery AKA pedaling stiffness. To reduce lateral deflection at the bottom bracket we chose to enlarge the spindle and the crank arm’s interfaces. We robbed material from unloaded sections to reinforce these zones of high stress. Not only are you going to be more efficient with power delivery, but you’ll also feel the instant response of acceleration. Seen through another lens, less energy will be required to achieve the same elapsed time. Key differences: The Box One M30 crankset is just as tyrannical as its big brother the Box One M35. Since it's designed for the smaller rider the now 30mm spindle is as extreme to a smaller rider as the 35mm is to a burly world champion. The crank arms are hollow-forged but reduced in size for their application. It is possible to add too much stiffness where the rider will not feel the benefits. Going beyond that point simply adds material which is surplus weight. We’ve removed the stabilizer rings from the spider and removed unneeded material from its legs. These cranks are engineered for smaller-sized racers. FEATURES - Oversized Technology™ - Hollow Forged Design - Large 30mm Alloy Spindle - Self-Extracting Crank Bolt System IMPORTANT NOTES - BB86 frames require Praxis™ part 86-4001B or 86-4001W. - BB30/PF30 frames require Praxis™ part 68-4001R or 68-5401R. - T47 frames require Praxis™ part 47-0000. - Do not use pedal washers when installing pedals onto these cranks. M30-M cranks were designed to be used without pedal washers. COMPATIBILITY - Box Two Chainring - Box One Chromoly Chainring Bolts - Box One 7075 Alloy Chainring Bolts - Box Two Oversized bottom bracket M30

The Box Two M30-P crankset is a slightly less acute embodiment of our Oversized technology for cranksets. We squeeze in a show-stopping Praxis™ made 30mm that’s been cold-forged from 7075 T6 aluminum and then painstakingly ground to precision. You’ll be relieved to know this will all fit in a European bottom bracket. The crank arms and spider are poached from the Box One M35 model and as a result, you get all that hollow-forged generosity to help you put that power down. These cranks are engineered for the larger-sized racers. - Oversized Technology™ Hollow Forged Design - Oversized 30mm Alloy Spindle - Self-Extracting Crank Bolt System - 4-bolt 104 BCD Spider with Flex-Resistant Ring - External BSA 30mm BB Included - Weight: 28.6oz - Drive Side Compatibility: Right Hand Drive - Crankset Style: 2-Piece - BB Style: Euro - Chainring BCD: 104 - BB Included: Yes

- Stiff oversized hollow-forged aluminum arms for frames with PF30 or BB30 BB shell - Innovative Praxis 35mm external bottom bracket and oversize aluminum spindle - Includes an aluminum BB30/PF30 bottom bracket with precision sealed bearings

Our Badger Aluminum Crankset is the definition of bang for your buck. High-quality crank set that won’t break the bank. Featuring an Aluminum spindle, Aluminum arms (165mm, 170mm, 175mm), and an included Bottom Bracket this group is hard to beat. - 30mm aluminum spindle - Adjustable spindle length with included spacers - Compatible with SRAM DM chainrings - Includes a black 32t Blackspire Snaggletooth chainring - Crankset with chainring: 678g

Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware

Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware

- Cinch Direct Mount Technology for 1x - Direct power transfer from stiff carbon fibre construction - Built for Road, CX, Gravel, Tri, TT - Chainline: 1x = 47mm, 2x = 45mm - Weight: 442g (40t, 1x), 590g (2x) - Q-Factor: 149mm - Bottom bracket/spider sold seperately - For 2x configurations, removeable spider required.

The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately

The FSA Gradient crankset is designed for enduro riding, for riders that like to crank up the trail and tear it apart on the way back down. Gradient raises the standard on strength, while keeping components lightweight. - The convertible spider design allows for different chainring and chainline configurations - Direct mount steel chainring features a thick-thin tooth design for maximum chain engagement - Crank arms are solid forged from AL7050 aluminum - Optimized for 11-speed systems - For Boost spacing - Number of Chainrings: Single - Chainline/Hub Compatibility: 150/157 Hubs, 157 Super Boost Hubs - Crank Length: 170mm - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 11 - Chainring BCD: Direct Mount FSA - BB Included: No

SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and BCD 90 inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English

The KFX Super Light crankset is the pinnacle of FSA's manufacturing capabilities. Ultra light and stiff, this crankset will standup to the toughest riding conditions. Feeling equally at home on an enduro trail as it does on a flowing CX ride, this is the crankset that'll shed weight while instilling confidence. - Modular - Thanks to this interchangeable system, any rider or mechanic can easily, quickly, and safely swap out the spider, spindles, and chainrings from one set to another - Lightweight - The KFX range brings a selection of lightweight and stiff components to mountain bikes - Revolutionary Manufacturing Process - Each KFX crank arm starts out as two separate forged blanks that are precision CNC-machined into two pieces. The hollowed-out halves feature a series of three main ridges & grooves down the outside of each arm that form a tightly interlocking single piece - Number of Chainrings: Single - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 10, 11 - Chainring BCD: Direct Mount FSA - BB Included: No

The KFX Modular 1x Super Light aluminum MTB crankset is created through an innovative manufacturing process that dramatically reduces weight while increasing stiffness. The hollow construction begins with forging, then precision CNC machining, and finally culminating with an advanced bonding technology. Blending strength and stiffness, the KFX is an ideal option for riders seeking a professional level, top-of-the-line crankset. - Crank is forged and precision CNC-machined with advanced bonding technology for ultimate strength and stiffness - A unique manufacturing process dramatically reduces weight - 392EVO spindle is crafted from forged AL7050 aluminum - CNC chainring is crafted from AL7075 aluminum - Fits Shimano and SRAM 11-12 speed system - Chainline: 51.8mm - Number of Chainrings: Single - Chainline/Hub Compatibility: 141/148 Boost Hubs - Crank Length: 175mm - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 30 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 11 - Chainring BCD: Direct Mount FSA - BB Included: No

SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminum MTB cranks. The latest FEA analysis tools, rigorous lab testing, and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested, and manufactured in Barnoldswick, UK. - 15% lighter and stiffer than the previous model - Now featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Forged and CNC machined 7075 series aluminum alloy crank arms - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 641g (arms, axle, and 34 tooth spiderless ring)

The RX Crankset is our latest step into the Gravel and Road world, following our successful RX4 calipers and RS4 hubs. A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight. All are proudly designed, manufactured, and tested in Barnoldswick, UK to the same standards as our MTB cranks, for confident use on or off-road. - A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight - Tested to the same standards as our MTB cranks for confidence on or off-road - Featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Fully CNC machined 7050 Aluminum for precise material removal - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 518g (172.5mm and 5 bolt spider, w/o BB)

The first fully customizable crank system! Select the color and length of your crankset. Don't forget to choose the bottom bracket that fits your bike and the color of the crank pullers that best suits you and your bike. Completely CNC machined, the package includes both arms. Axle and bolts are not included. - XC/Trail use crankset - Axle: 7075 T6 aluminum - 3 bolt direct mount - 11 and 12-speed compatible - Completely CNC machined the package includes both arms - Axle chainring and bolts not included (sold separately) - 298g

- Forged AL6061-T6 alloy crank arms for Origin8 Thruster Series modular cranksets - SRAM 3-bolt interface for direct mount chainrings and spiders - 24mm integrated Chromoly spindle - Crank arm tip protectors included with MTB/Boost and Fat 100/120 crank arm sets

Named after our local fabled redwood-covered climb, the Zayante-S version is spec'd with a simplified and economic set of our new LevaTime II rings with steel bolts. - Carbon arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Cold forged, proprietary LevaTime II X-rings (104/160BCD) with steel chainring bolts - Direct Mount (DM) 1x not available - For additional Praxis 2x chainring options, use PX211* - Works with 10/11sp drivetrains, not compatible at this time with SRAM AXS chain - Weight without BB: 684g (172.5mm with 50/34) - Unauthorized online sales prohibited by the manufacturer *M30 BB sold separately, use PX9040 for English 68mm, PX9011 for BB30/PF30 or PX9013 for PF86.5 BBs, PX-9014 for BBright, PX9015 for 386EVO, PX9016 for T47 external and PX9017 for T47 internal

GIRDER & GIRDER-HD | With an updated carbon shape, spacing, and a heavy-duty option, the new Gen2 Girder Carbon aims to be the new trail master. XC and Enduro riders who expect top-level performance, finish, and fitment will not be let down. - Lightweight carbon arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Gen2 cranks are perfect for trail or XC usage. Redesigned shape for more ankle clearance along with better chainstay clearance - Use 0mm offset ring= 55mm, 3mm offset ring= 52mm, 6mm offset ring= 49mm chainline - 3-bolt direct mount ring interface - Weight without BB or ring: 498g - Unauthorized online sales are prohibited by the manufacturer *M30 BB sold separately, use PX-9040 for English 68/73mm, PX-9012 for BB30/PF30 or PX-9013 for BB92

GIRDER & GIRDER-HD | With an updated carbon shape, spacing, and a heavy-duty option, the new Gen2 Girder Carbon aims to be the new trail master. XC and Enduro riders who expect top-level performance, finish, and fitment will not be let down. - Heavy Duty (HD) layup carbon arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Gen2 cranks are perfect for trail or XC usage. Redesigned shape for more ankle clearance along with better chainstay clearance - Use 0mm offset ring= 55mm, 3mm offset ring= 52mm, 6mm offset ring= 49mm chainline - 3-bolt direct mount ring interface - Weight without BB or ring: 498g - Unauthorized online sales are prohibited by the manufacturer *M30 BB sold separately, use PX-9040 for English 68/73mm, PX-9012 for BB30/PF30 or PX-9013 for BB92

- Quarq D1 crank arm assembly - 8 bolt interface for use DZero DUB and DFour DUB power spiders

The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g

- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - CINCH technology offers game-changing compatibility - Includes 30mm CINCH spindle - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 135/142 MTB Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - BB Included: No