Parts

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

Material: Scandium T7 Tube, Material: 7075 Pin with 7075 seatholder Finished: Black anodized(350mm). Yoke: Black, Gold, Red available Screws:M6x37mm and M6x47mm/ 64Ti Weight: 27.2x350mm/145g 30.9x350mm/152g 31.6x350mm/165g 34.9*350mm/170g Also 400mm length available- Gold, Red, Blue, anodized.

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

Deore XT BR-M8100 hydraulic disc brake calipers offer powerful braking in a lightweight design. - 4-piston caliper is designed for tough enduro trails - High power braking instills greater downhill confidence and control - Banjo type connection and inside hose routing - Quick and easy assembly

The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle

- 3D Forged and CNC machined from AL7050/T73 - 3D Forged AL6061/T6 faceplate - 4-bolt cold-forged alloy faceplate - Cr-Mo hardware - 40mm fork clamp stack height - 162g (80mm)

- Extruded and CNC-machined AL6061-T6 pedal body - 2 sealed bearings and 1 DU sleeve bushing - 9/16" CNC chromoly spindle - 109mm x 110mm x 15mm concave platform for large feet - M4-10mm outer and M4-8mm inner SS replaceable pins enhance concavity - Size: 9/16" - Material: AL6061 - Style: Platform Pedals

- Internal junction-A with two e-Tube ports - Externally facing charging port eases charging, especially for internal batteries - Mounts in road bar end or in frames with an integrated mounting point - For easier cable routing, use along with EW-JC130 three-way e-Tube cable

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.7mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 129g

T47 threaded BB cups for T47 frames and 29mm diameter spindle SRAM DUB compatible cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 86mm - 121mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 29mm - Over Bearing Width: 90mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields. - Tool Pattern: 48.5mm x 16-notch - Weight: 97g Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - T47 shell with a width of 86.5mm and SRAM DUB Road Crank - T47 shell with a width of 89.5mm, 92mm, and SRAM DUB MTB Crank - T47 shell with a width of 121mm and SRAM DUB Fatbike Crank

T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 30mm - Over Bearing Width: 68mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 97g

T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM and Truvativ GXP cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 24mm ID wave washer - Drive Side Bearing: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 22/24mm - Over Bearing Width: 91.2mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 162g

T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specification: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 24.00mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 150g

T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 29mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 155g Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - T47 shell with a width of 68mm and SRAM DUB Road Crank - T47 shell with a width of 73mm and SRAM DUB MTB Crank - T47 shell with a width of 100mm and SRAM DUB Fatbike Crank

T47 threaded BB cups for T47 frames and 30mm spindle diameter cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specifications: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 30mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 48.5mm x 16-notch - Weight: 155g

Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum

SRAM's 500 Aero Shifters deliver all the performance and features of more expensive models for your time-trial or triathlon bike. These aluminum bar end shifters feature a three position internally adjustable stop that can be flipped and rotated for precise cable release tuning.

SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage

The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap. - X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings and aluminum cage - Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock - Medium cage: 11-26 through 11-36 cassettes, 269g - Long cage: 10-42 cassette, 275 g

- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 31, Speed: 11, BCD: 80, Bolts: 4, Inner, Aluminum, Black - Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 48, Speed: 11, BCD: 110, Bolts: 4, Outer, Aluminum, Black

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

The Liberator Race is a unique saddle in the Terry line in that it appeals to both male and female riders. It also defies categorization since it falls between performance and touring with more padding than a race saddle but less mass and narrower mid-section than a touring saddle. It has a higher rear platform and more of a dropped nose than other Terry saddles so it's ideal for strong power riders with lots of sensitivity upfront. Longer-distance endurance riders have raved about this saddle's particular shape and level of comfort. - Durable Fibra-tek cover - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Length x width: 267mm x 147mm - Weight: 255 grams; 9 ounces - Rails: ti-316

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacer (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Gray - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 111g

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 100g

Gates Carbon Drive CDX Rear Sprockets for Sturmey-Archer 3-Lobe are crafted from stainless steel, making them durable enough for global trekking, competitive racing, or rugged off-roading. - Stainless steel construction - 11mm pitch - Sturmey-Archer 31.85mm 3-Lobe fitment

Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

Triple-butted 7075-T6 aluminum construction with provisions for STI/Ergopower cable routing\n- Rapid Hand Movement (RHM) bend with a patented Continuous Incremental Radius design provides a modern, shallow-ergonomic profile with more hand positions than traditional anatomic shapes - Drop/reach are measured center-to-center, width is measured outside-to-outside (O-O) - The drops flare outward at 12 deg angle and extend the width (O-O) an additional 60mm. 260g (42cm)

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.