Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Grips

Brooks Ergon GP1 Leather Grips 130mm/100mm
$95.00
These grips are ergonomically designed for straight, swept and riser handlebars. Genuine, supple Brooks leather has been fused with an ergonomic rubber base for exceptional comfort and a delicate touch. They're fastened by an aluminum handlebar end clasps. - Size: 130mm/100mm
Brooks Ergon GP1 Leather Grips 130mm/130mm
$95.00
These grips are ergonomically designed for straight, swept and riser handlebars. Genuine, supple Brooks leather has been fused with an ergonomic rubber base for exceptional comfort and a delicate touch. They're fastened by an aluminum handlebar end clasps in satin silver or copper-coloured finish. - Size: 130mm/130mm
Brooks Plump Leather Grips
$90.00
In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Adjustable Length from 80 mm to 130 mm - Inner Diameter: 22.2 mm - Weight: 290g per Pair
Brooks Slender Grips 130mm & 130mm
$90.00
Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.
Ergon GP5
$69.95
The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts
Portland Design Works Whiskey Grips
$65.00
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' ergonomic Whiskey Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age.
Ergon GP3 BioKork
$59.95
The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting
Ergon GP4
$59.95
The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)
Ergon GS3
$59.95
The GS3 combines comfort in a lightweight package, ideal for long distance endurance athletes. The three-finger bar end is made out of fiberglass reinforced composite, which offers more hand positions for increased comfort and leverage on long mountain bike rides. Additional rubber is used on the bar end, improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Bar end: fiberglass composite with rubber inserts
Ergon GP3
$49.95
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting
Ergon GS2
$49.95
The GS-grip combined with a compact 2-finger bar end made out of fiberglass reinforced composite, which offers more hand positions for increased comfort on long mountain bike rides. Additional rubber is used on the bar end improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC
Portland Design Works Bourbon Grips
$45.00
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' Bourbon Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age. - Durable, high-quality full grain leather - Sturdy machined aluminum alloy lockrings - Fits 22.0-22.2mm handlebars - Weight: 136g (4.8oz) per pair - Length: 130mm (5.1") each - Lifetime PDWarranty
Ergon GS1 Grips
$44.99
Ergon's lightweight GS1 Grips feature an anatomical design that positions your hands and wrists for the ultimate in comfort. To achieve that sweet feel, these great grips deliver excellent pressure distribution with 100% support for your hands. And installation is simple with the built-in bar clamps. With their low weight and outstanding ergonomics, these grips were designed with marathon mountain bikers in mind, so you can be sure they excel for all types of riding, short or long.
Brooks Cambium Comfort Grips
$40.00
The Cambium Comfort Grip! Organic cotton canvas is vulcanized and bonded to organic rubber to provide superior comfort and style. 100mm set for use with dual grip shifting systems and handlebars with shorter contact area, such as Brompton "M-Type" handlebars.
Brooks Cambium Comfort Grips 130mm
$40.00
Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. Full 130mm set.
Brooks Cambium Comfort Grips 130mm/100mm
$40.00
Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. The 130mm/100mm set is for use with grip shifters.
Eclypse (POG) Road Polymer Omni-Grip
$39.99
- Durable and soft EVA Polymer material - High grip in all riding conditions - 2.5mm thick x 2100mm long - Eclypse end plugs included
Ergon GP2
$39.99
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
Ergon GS1
$39.99
Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC
Ergon GC1 BioKork
$39.95
The sustainable BioKork version of the GC1 grip, developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 BioKork corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
Ergon GE1 Evo Factory
$39.95
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
Ergon GP1 BioKork
$39.95
Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting
Ergon GS1 Twist-Shift
$39.95
Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 for Twist-Shift combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. The package includes an optional adaptor for increased spacing according to the user's preference. This gives the rider a larger gripping position away from the Twist-Shift. Without it, a more compact position. Carbon bar compatible.
Giant Ergo Max Plus Lock-On Grips w/ Bar-Ends
$37.00
- Ergonomically Designed For Comfortable Weight Distribution - Extra Large Platform Reduces Hand Numbness - Triple-Density Material Provides Support And Reduces Vibration - Gel Layer Enhances Vibration Damping - Unique Polymer Compound Improves Durability In All Conditions - Giant 1.0 Lightweight Aluminum Single Lock-On System - Integrated Ergonomic Bar End For Multiple Riding Positions
SRAM DoubleTap Lever Hoods
$37.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.
SRAM HydroR Lever Hoods
$37.00
Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.
Fabric Slim Grip
$35.00
Fabric's Slim lock-on grip is the lightest lock on grip available, featuring a dual texture kraton rubber sleeve over a perforated lightweight core. The hidden aluminium clamp design provides maximum grip surface area, great with or without gloves. -Diameter: 29mm -Length: 135mm
Fabric XL Grip
$35.00
Fabric's XL lock-on grip is ideal for wider bars. The soft kraton rubber logo increases comfort and a hidden aluminium clamp provides maximum surface area. Their unique 3 shot manufacturing process provides an extra durable, dual density grip. -Diameter: 31mm -Length: 145mm
Liv Allay Plus Lock-On Grips W/ Bar-Ends
$35.00
- Designed with softer rubber tread for exceptional shock absorption and hands that stay fresh all day - Extra large raised areas to provide excellent shock absorption - Softer, dual-density rubber compound improves control in all conditions - New polymer material for durability - Giant 1.0 single lock ring system
ODI AG-2 Lock-On Grips
$35.00
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
Ergon GA2
$29.99 - $34.99
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Ergon GE1 Evo
$34.99
The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
Ergon GE1 Grips
$34.99
- Enduro series with dual-compound surfaces, softest in the palm rest - Inboard aluminum clamp with cutouts in grip core for added comfort - Updated rubber compound for greater shock absorption and steering control - Choose either standard or slim diameter
Ergon GD1 Factory
$34.95
Ergon introduces the first MTB Gravity Grip with tapered grip shape (patent pend.) which features more damping in the outer area of the grip and a slim inner diameter. The unique rubber compound, manufactured in Germany, offers adhesive and rebound properties which have never been seen before in a bicycle grip. The grip feeling is soft, but still very defined and precise. The surface profile provides the hands with optimal grip and reduced gripping force. The slim inner stop additionally improves fast positioning of the hand. The high-strength aluminum inner clamp keeps the grip twist-proof, even on carbon handlebars. GD1 Slim Factory: With an inner-diameter of 29mm and outer-diameter of 30.5mm, the GD1 Slim Factory is recommended for riders with glove size Small / Medium (6.5 – 8.5) or riders who prefer a slim grip thickness. GD1 Regular Factory: With an inner-diameter of 30mm and outer-diameter of 32mm, the GD1 Factory has, in comparison to the GD1 Slim Factory, more damping characteristics and is recommended for riders with glove size L/XL (8.5 – 10.5) or riders who prefer a normal grip thickness. - Uses: downhill, freeride, gravity disciplines - Clamp: aluminium / CNC machined - Material: custom rubber compound
WTB Ace Padloc Grip
$34.95
A gently ergonomic rise to the Ace’s center provides an even closer attention to rider comfort when paired with the Ace’s PadLoc Relief. A raised mosaic of grip lines also provides enhanced feel in the wet, making the Ace an all-around favorite. - Compatible with PadLoc-ready bars only
WTB Clydesdale Padloc Grip
$34.95
Big riders, fear no more: you can have comfort and a real grip for your hands. The Clydesdale’s generous 33mm profile made from our high end Contact Rubber pairs perfectly with our Padlock Relief, ensuring that big hands get high-end features too. - Compatible with PadLoc-ready bars only
WTB Commander Padloc Gripshift
$34.95
Jerome Clementz's grip of choice. Prominent lettering lets people know you’re in charge while Contact Rubber and the PadLoc Relief eliminate movement and provide an invitingly tactile feel. Ride hard and shift happy. - Compatible with PadLoc-ready bars only.
WTB Commander Padloc Gripshift
$34.95
Jerome Clementz's grip of choice. Prominent lettering lets people know you’re in charge while Contact Rubber and the PadLoc Relief eliminate movement and provide an invitingly tactile feel. Ride hard and shift happy. - Compatible with PadLoc-ready bars only.
WTB Thinline Padloc Grip
$34.95
A thin silhouette and opposing working edges provide irrefutable grip, even in the wet. The Pilot’s 28mm svelte shape provides a paired down though classic profile that features the PadLoc Relief so that even slim profiles get big comfort. - Compatible with PadLoc-ready bars only.
Chromag Clutch
$34.00
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Chromag Squareweave XL Grips
$34.00
• Larger diameter model for bigger hands, offers extra cushion • Same bulged center as the original Squareweave • Aluminum clamps secure the grip on both for twist-free performance
SRAM DoubleTap Lever Hoods
$24.99 - $33.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.
ODI Stay Strong Special Edition Ruffian BMX Lock-On Grips
$32.95
ODI has put together a Limited Edition Stay Strong version of the popular Ruffian BMX Lock-On Grip. Before becoming a multi-time X Games Gold Medalist, Stephen had already won just about every racing title in the UK. The special packaging and laser etched clamps help support Stephen's Stay Strong Foundation which was created after the super-star dirt jumper was left paralyzed when he crashed during the Baltimore Dew Tour stop in 2007. By purchasing a pair of these grips you are helping to support Stephen and his family on his road to recovery and you are showing love to a fellow BMX racer. - Diamondized pattern for optimal traction - Inlcudes custom Stay Strong clamps - Lock-On Grip System = 100% Slip-Free performance - Comes with a Stay Strong sticker - Includes Snap Cap End Plugs
ODI Vans Lock-On MTB Grip
$26.95 - $32.95
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench
Renthal Lock-On Grips
$29.95 - $32.95
- 4 compounds: medium, soft, super comfort (extra-soft) or Kevlar version with suspended Kevlar particles for the ultimate tacky yet durable grip - Machined 6082 aluminum collars lock tightly with integrated grip core - 30mm outer diameter knurled grip
Renthal Traction Lock-On Kevlar
$32.95
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
Renthal Traction Lock-On Ultra Tacky
$32.95
- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK
ESI Fit CR Grips
$32.92
ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit grips have three distinct areas: INNER - This area is the perfect step up for your hands to rest against for maximum bar control in turns. MIDDLE - This area is perfect for extra torque and powering while climbing. OUTER - This thickest area is for better hand comfort, especially while descending. Each area of the fit grip flows flawlessly into each other creating the perfect hand placement naturally. Your hands instantly feel comfort when they grasp their unique shape, as if they were exclusively molded for your hands.
ESI Fit XC Grips
$32.92
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
ODI Aaron Gwin Lock-On MTB Grip
$31.95
- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp
Chromag Basis Grips
$31.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Chromag Palmskin Grips
$31.00
Chromag's Palmskin grip is designed for riders who like a softer, supple feel and may prefer not to use gloves. The ribbed pattern is compliant under the hand while managing moisture by channeling it away into the groove.
Chromag Squarewave Grips
$31.00
Chromag's Squarewave grip is designed with performance and comfort as the paramount goals. The gentle bulge fits nicely in the cup of the hand to promote long ride comfort. The progressive tread is finest/softest where it meets the outer edges of the hand and coarsest under the meat of the palm for a balance of compliance and control over longer rides.
Giant Connect Ergo Max Lock-On Grips
$30.00
• Custom ergonomic profile for increased ride comfort • Co-molded, durable Kraton rubber with softer material in critical comfort areas • Non-slip knurled surfaces for use in all conditions • Lock-on design
Answer Products Stein Grips
$29.99
Inspiration can come from anywhere. For us it usually comes from beer receptacles. Wisconsin is a land of German immigrants. The tradition of beer brewing is vast and the consumption is hardy. So, when looking for a new pattern design for our 143mm grips we didn’t have to look much further than something our hands were already clutching-a stein of beer! It just so happens that a dimple pattern combined with a 2 ply soft rubber compound (29mm diameter) make the perfect grip pattern!
Answer Products Tread Grips
$29.99
Rubber tires need to grip dirt. We took some of our favorite tread patterns, tweaked them- added a 2” flange and created a thick (31.5mm diameter) aggressive grip that absorbs vibration and is super sticky!
Ergon GP1
$29.99
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
Fabric Ergo Silicone Lock-On Grips
$29.99
Get extra support on the ride with the Ergo lock-on grip. A broad, flat pad braces your palm at the outer edge of the handlebar. Further support comes from its shock-absorbing silicone construction, while scuff-resistant bar end plugs prevent the bike slipping when propped up. - 100% silicone grip - Ergo palm pad - Lock-on clamp - Bumper bar ends - Durable and tough - Diameter: 30mm - Length: 135mm - Weight: 116g pair
Fabric Semi Ergo Silicone Lock-On Grips
$29.99
Get extra grip and support on the ride with the Semi ergo grip. Shaped to follow the contours of your hand, the subtly ergonomic, Hex-patterned grip is made from medical-grade silicone, making it both ultra grippy and supportive. - 100% silicone - Hex pattern - Ergonomic shape - Durable and tough - Bumper bar ends - Diameter: 32mm - Length: 135mm - Weight: 96g pair
Lizard Skins DSP 30.3mm Grips
$29.99
- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape
Page 1 of 4 Next page