Filter By:

  • Show More Brands

  • Show Fewer Brands

Cranksets

Vuelta Pista Cranks
$66.00
- Forged 7075 aluminum for durability and weight - 3/32" chain compatible - 46T aluminum chainring included - *Use with 107 or 110mm JIS Square Taper BB
Vuelta Pista Track 46T 144/BCD Crankset
$70.00
The Vuelta Pista Track Crankset is lightweight, reliable, and proven on the track. Look good, feel confident and go fast! - 144mm BCD - 1/2"x3/32" alloy chainring - 46T gearing - Fits square taper, 108mm bottom bracket - Cold-forged alloy crank arms - Available in 165 and 170mm lengths
TruVativ Descendant 6K DUB Crankset
$105.00
The Descendant 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately BB Included: No Chainring BCD: SRAM Direct Mount Crank Intended Use: Mountain Number of Chainrings: Single Drivetrain Speeds: 12, 11, 10 Spindle Interface Type: SRAM DUB Chainline/Hub Compatibility: 135/142 MTB Hubs
TruVativ Descendant Carbon DUB Boost Crankset
$260.00
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
TruVativ Descendant Carbon DUB Crankset
$260.00
The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
TruVativ Stylo 1.1G
$150.00
TruVativ's Stylo 1.1G is made from race-proven 7050 aluminum for great strength and superb stiffness. The crankarms and GXP spindle keep the weight down and TruVativ's sealed GXP Team bottom bracket gives you durable, smooth action that rolls season after season. Plus, the 1.1G's chainring boasts hard-coat anodizing to increase strength with the longevity you expect from TruVativ.
TruVativ Stylo 6K Boost DUB Crankset
$105.00
The STYLO 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. 6000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - 6003 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
TruVativ Stylo Carbon Eagle Boost DUB Crankset
$260.00
The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
THM-Carbones Clavicula Carbon Compact Crankset
$1,599.99
The "Clavicula Compact" is the compact version of our super light race crankset, enabling you to use smaller chainrings. Technically identical with the standard “Clavicula”, it maintains the same record-breaking stiffness-to-weight ratio. Typical chainring combinations used with compact cranks are 34/48 or 36/50. While giving similar gear ratios to triple cranks, the smaller chainrings found on compact cranks yield a better chainline, better shifting and fewer doubled gears. In addition, the shorter spindle allows a greater lean angle in right hand turns. And last but certainly not least, many riders simply enjoy the compact crank’s better looks compared to triple cranks. As with our “Clavicula” the cranks are delivered without chainrings. The bolt circle diameter is a standard 110mm. A bottom bracket and mounting tools are supplied with the cranks.
THM-Carbones Clavicula Carbon Crankset
$1,599.99
The “Clavicula” is a revolutionary new design of an all-carbon crank. They are designed in close cooperation with the Cologne-based design-specialist formagic. New production methods, never before used for cranks, achieve a giant leap in total stiffness. The crank’s stiffness-to-weight ratio is setting new standards. In-house lab testing of various high-end cranks shows the superior performance of our crank system. The cranks are designed for road bike applications with a 130 mm or 110 mm bolt circle diameter and for 68 mm bottom bracket width. 170mm, 172.5 mm and 175 mm crank arms available. The sealed bearing bottom bracket attaches outside of the frame using the standard BSA threads. This design allows the use of larger diameter bearings and a wider bearing placement. In combination with the 30 mm diameter axle these modifications make for a very stiff drivetrain. Optional BB shells for Italian threaded frames now available upon request. Furthermore an adaption for the BB30 and the specialized system are available. Extensive testing of this ground-breaking invention was our top priority. We are currently undertaking various long term and stress tests, because as a pure-bred racing component the “Clavicula” must be able to continually withstand highest loads – be it in hard sprints or during the toughest classics. Both static and dynamic tests have been completed successfully. However, to aviod even the slightest risk we are currently setting a rider weight limit of 95 kg (207 lbs.). Your safety is our main priority!
THM-Carbones Clavicula Carbon MTB Crankset
$1,599.99
Uphill every gram counts. Thus, this is what we paid attention to when developing our super-light and stiff “Clavicula MTB” for mountain bikers. The result of a long period of development and uncountable test runs, we present what may be the world’s best MTB racing crank. At only 440 g including BB bearings and spindle the “Clavicula MTB” is lighter than any competitor and therefore impossible to beat on demanding terrain where you have to fight you way to victory over countless grinders. Aside from the seconds the lower mass shaves off your lap times, it also improves handling of the entire bike. Technical sections become easier to master – the “Clavicula MTB” puts you ahead of the pack As the regular “Clavicula” the new crank is shipped without chainrings, allowing you to choose any set with the common 104/64 mm BCD. The granny with its 64 mm BCD must be 22 teeth or larger. The crank comes complete with bottom bracket and mounting tool.
THM-Carbones Clavicula DH Crankset
The “Clavicula DH” is the downhill version of our superlight racing crankset. Designed with additional reinforcements it is intended for the extreme demands of downhill racing: Even flying debris, crashes on rocky terrain or sliding along the ground can hardly hurt this crank. Thanks to intelligent design it is still light as a feather. The low weight of the “Clavicula DH” improves the overall handling of any DH bike. A lighter bike will always be more responsive to steering input and thus easier to control. At only 450 g for the complete crankset including the bottom bracket the “Clavicula DH” is much lighter than similar sets. Power transfer and longetivity satisfy the most demanding racer. The crank comes complete with a 38-tooth chainring and is shipped with bottom bracket and mounting tool.
Sturmey-Archer FCT66 Crankset
$79.90
- Track crank, also for use with internal gear hubs such as the Sturmey 3-speed fixed and 2-speed kickback - Forged 6061 aluminum crankarm/spider with square BB taper - Includes CNC machined, black anodized 7075 aluminum chainwheel (46T)
Shimano 105 R7000 Crankset
$157.99
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
Shimano Alivio M4050 Triple Crankset
$81.99
Shimano's 9-speed Alivio Crankset is a solid replacement for your tired, worn out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. Plus, the chainrings shift super-quick and precise. - BB Included: No - Chainring BCD: 96/64mm - Chainrings Included: Yes - Crank Intended Use: Mountain - Drivetrain Speeds: 9 - Pedal Spindle: 9/16-inch - Spindle Diameter: 24mm - Spindle Interface Type: Shimano Hollowtech II
Shimano Altus M311-L Crankset
$31.99 - $32.99
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS
Shimano Altus M361-L Crankset
$44.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
Shimano Claris R2000 Double Crankset
$80.99
Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt - 150mm Q-factor
Shimano Claris R2030 Triple Crankset
$91.99
Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt
Shimano Deore Hollowtech II M6000-2 Crankset
$124.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8
Shimano Deore Hollowtech II M6000-3 Crankset
$124.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50
Shimano Deore XT Crank (Double)
$219.99 - $222.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
Shimano Deore XT Crank Arms
$144.99 - $179.99
- Aluminum crank arm and spider with steel spindle - 4 bolt spider compatible with all XT 8000 series chainring configurations - Hollowtech II crank arm construction - Steel driving gear teeth and aluminum support gears - 96mm P.C.D. - 176 Q-Factor, 53.4mm OR 50mm chainline - BB Included: No - Chainrings Included: No
Shimano Dura-Ace 9100 11-Speed Crankset
$594.99 - $599.99
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Shimano FC-MT900-1 12-speed Crankset
$229.99
- Special MTB gear teeth profile improves chain engagement and retention - Stiff and lightweight hollow forged crank maximizes power transfer while limiting weight - Chainline: 52mm - Bottom bracket compatibility: Hollowtech II
Shimano GRX RX600 11-Speed Crankset
$146.99
Shimano's new FC-RX600-11 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding, with tighter gear steps for maintaining optimum pedaling cadence. The 2x11-speed crank is available in a 46-30T or 40T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T, 40T
Shimano GRX RX810 11-Speed Crankset
$224.99
Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T
Shimano SLX M7000-1 Crank Arm Set
$96.99
- Pedal Spindle: 9/16-inch - BB Included: No - Chainring BCD: 96 Shimano Asymmetric - Intended Use: Mountain - Drivetrain Speeds: 11 - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 135/142 MTB Hubs
Shimano SLX M7000-2 Crankset
$129.99
- Solid pedaling efficiency - New 3D composite chain ring teeth composition is optimized for each chainwheel load out - Balance of strength and weight in 2-piece crank construction - Improved driving rigidity - Close ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Small ball bottom bracket - Series : SLX - Crank Construction: HOLLOWTECH II Technology - Bottom Bracket: BB-MT800/BB-MT800-PA - Chain Line: 48.8 - Average Weight: 788.7g (28-28T) 761.4g (36-26T) 739.8g (34-24T)
Shimano SLX M7000-B2 Boost Crankset
$132.99
- Pedal Spindle: 9/16-inch - BB Included: No - Chainring BCD: 96 Shimano Asymmetric , 64 Shimano Asymmetric - Intended Use: Mountain - Number of Chainrings: Double - Drivetrain Speeds: 11 - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 141/148 Boost Hubs
Page 1 of 4 Next page