Car Racks

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference - Carries up to 4 bikes with Thule T2 Pro XT Add-On (sold separately, 9036XTB, 2" receiver only)

The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between the rack and the vehicle - No-tool install with hand-tight hitch cam system - Gloss metallic powder available in 3 colors - Low-profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47 inches and tires as large as 3 inches - Increased spacing between bikes to 14 inches - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes

Easy-to-install foot for Thule Edge roof racks, for vehicles with flush railings. - Easy-to-install roof rack feet - For vehicles with flush railings - For Thule Edge roof rack systems Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle.

- Pack includes 2 wheels straps and 2 road adaptors - The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

Innovative kayak carrier that is safe, stylish, easy to use, and integrates seamlessly with Thule roof rack systems. Features - Quickly raise or fold when not in use using the convenient front release handle - Easily manage load straps while strapping down the kayak using the integrated StrapCatch - Kayaks are protected during transit due to the durable and soft rubber padding - Theft resistant design keeps carrier securely attached to load bars (locks included) - Easy to install directly into the Thule WingBar Evo or AeroBlade T-track, or around Thule SquareBar via the integrated, tool-free mounting hardware (SquareBar requires an adapter) Technical specifications - Load capacity: 75 lb - Dimensions: 18 x 8 x 17.5 in - Weight: 15.2 lb - Rubber cover for strap buckle - Lockable - One Key System compatible Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar (Adapter/s required: Thule SquareBar Adapter 4-pack) - ProBar - Xsporter Pro

Thule Epos bike rack fits all types of bikes and is fast, easy, and convenient to use – it takes minimal effort to mount bikes thanks to an innovative telescopic bike attachment system. The bike arms simply let you attach your bike anywhere on the frame or the rear wheel, providing you with numerous attachment options. You can load and unload up to three bikes in any order – all types of frames and geometries are supported, including ebikes, mountain bikes, gravel bikes, and bikes with fenders and racks. - Fast and easy loading and unloading of all types of bikes and ebikes. The patented telescopic bike arms with pivoting cradle and steel reinforced straps attach to the bike frame or rear wheel - The high load capacity of 75 lb/bike makes it possible to transport heavy ebikes - Generous 9.8 in distance between bikes reduces risk of bike-to-bike contact - Extra-long wheel holders enable easy transport of bikes with long wheelbases, up to 53 in - Ratcheting pump buckles and wheel straps for easy fastening of tires up to 3.2” (up to 5” tires with a separately sold accessory) - Fully foldable for convenient installation, handling, and storage - With bikes mounted, the trunk is accessible with a smart foot pedal tilt. Without bikes, the trunk is accessible without tilt - Max bike carrying weight 160lbs

An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

- Easy transport - Designed for pick pick-up trucks, this robust locking fork mount rack securely carries bikes in the bed of a pick pick-up truck with no bolting or drilling. - Easily and securely attaches to a standard pickup truck bed rail without drilling - Fits compact and full full-sized trucks, including those with bed liners and trucks with an integrated bed rail system - Securely transport bikes with 9mm quick release forks and thru thru-axle diameters 12x100, 12x110m, 15x100, 15x110 - 2 sizes available: Full Full-Size & Compact

Hollywood's Traveler racks get you traveling with all your bikes quickly and economically. The Traveler 4 carries 4 bikes and includes Hollywood's separators and anti-sway stabilizers, which makes mounting the bikes easy and protects them in transit. This versatile hitch-mount rack tilts down for easy rear access and the arms fold out of the way when the rack is not in use. Plus, Hollywood's No-Wobble Hitch holds the whole system steady even on bumpy roads. And with the universal heavy-duty metal hitch insert, the Traveler 4 fits 1 1/4- and 2-inch hitches so you can use your rack on different vehicles. - Not to be used on any trailer, fifth wheel, or towed vehicle - Weight: 28 lbs - Max weight capacity: 35 lbs per bike

"What if?" - When we asked the question, the Piston Pro X was the answer. Genuine Kashima coated hydro-pneumatic arms make loading and unloading a one-handed operation. Touchless arms grab the tires, keeping your bike secure, and your paint pristine. Low-profile integrated LED tail lights synchronize with your vehicle, providing enhanced rear visibility and on-road safety. These and many other features culminate in a rack designed, built, and tested to push the envelope and provide you with unparalleled ease of use, peace of mind, and lasting value. This is the Piston Pro X. OneTap Hit the levers and watch as the cradle arms open automatically into position. Kuat's new patented hydro-pneumatic OneTap levers make loading your bikes easy, and fun. FastFit Wheel Chock System It's called FastFit for a reason: This patent-pending feature changes wheel sizes from 18" to 29" in seconds, tool-free. QuickConnect QuickConnect lets you expand or consolidate your Piston from 2 to 4 bikes in a matter of minutes. Current record: 44s. Foot & Hand Pivot Fold your Piston up or down with the convenient foot pedal. Have a fully loaded 4-bike? Easy Assembly EasyClip patent-pending tray tabs make assembling your Piston quick and painless. Spend all that time you save riding your bike. 99% Metal Construction Just because it's sexy doesn't mean it isn't heavy duty. The Piston Pro X is all metal and ready to take on all the adventure you can throw at it. TIGER DRYLAC The Piston Pro X is finished with TIGER DRYLAC, a class-leading powdercoat designed for the unforgiving conditions of both day-in, day-out commutes and epic road trips alike. Hard Wearing Hardware Igus bushings and 308 Stainless Steel, 750-hour salt spray automotive-grade hardware keep the burly, long-lasting trend going. This rack will stand up to years of demanding mileage and use. Liquid Painted Logo A little cherry on top: A liquid painted 3D logo finishes out the rack aesthetic adding dimension and style. LED Taillights QuickConnect patented trays and Add-Ons are prewired. LED lighting will connect and sync automatically when assembled. Connects to the vehicle via the included flat 4-pin connector. Magnetic Cable Docking Set up is as easy as snapping in the magnetic cable, and plugging the 4-Pin into your vehicle's trailer outlet. No confusing diagrams or head scratching routing. POGO Pins QuickConnect patented Add-Ons are pre-wired. Simply install the Add-On and the LED lightning will connect and sync automatically. Cable Management Provided magnetic clips let you manage the LED cable, keeping everything tidy and out of the way. Locking Security Tool No more Where's Waldo in your glovebox: The multi-purpose security tool locks in place at the end of the rack, ensuring it's always there when you need it. Flatlock Hitch Cam The patent-pending Flatlock hitch cam keeps things stable and its tamper-resistant head keeps it secure. Plus, we've added a stainless steel hitch lock for double security and additional peace of mind. High-Strand 12mm Cable Semi-integrated ultra flexible high strand 12mm cable, with plenty of length for the wheels and frames of all your bikes. The soft touch outer coating is also easy on your bikes.

The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fit kit for vehicles with flush railings - Comes as a package of four and helps attach a complete roof rack system to your specific car - Compatible with Thule Evo Flush Rail and Thule Edge Flush Rail foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - BMW X3 5-dr SUV with Flush Rails 2011 – 2017 - BMW 3-Series 5-dr Wagon with Flush Rails 2013 – 2019 - BMW X5 5-dr SUV with Flush Rails 2014 – 2018 - BMW X4 5-dr SUV with Flush Rails 2015 – 2018 - BMW X6 5-dr SUV with Flush Rails 2015 – 2020 - BMW X1 5-dr SUV with Flush Rails 2016 – 2020 - BMW X3 5-dr SUV with Flush Rails 2018 – 2020 - BMW X2 5-dr SUV with Flush Rails 2018 – 2020 - BMW X4 5-dr SUV with Flush Rails 2019 – 2020 - BMW X5 5-dr SUV with Flush Rails 2019 – 2020

Custom-fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fit kit for vehicles with flush railings - Comes as a package of four and helps attach a complete roof rack system to your specific car - Compatible with Thule Evo Flush Rail and Thule Edge Flush Rail foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Compatible Vehicles - KIA: Telluride 5-dr SUV with Flush Rails 2020 - 2021

Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.

Light, easy to use, and affordable, the Küat Beta is a thoughtfully designed hanging-style hitch rack that is as functional as it is beautiful. It folds up quickly for convenient storage and tilts down for easy access to the vehicle’s rear hatch. This bike rack for your car will go the distance. If you are interested in a 2-bike hitch rack for your car that doesn’t break the bank, look no further than the Beta hanging-style bike rack from Kuat. Made from lightweight aluminum and weighing just 14 pounds, this hitch rack folds up quickly and stores almost anywhere. The Beta is always ready to rock, right out of the box. The Beta features anti-sway carriages and has a convenient tilt feature that allows the rack to tilt down for easy access to the back of the vehicle. Plus, our hand-tight cam system keeps the rack tight in the hitch while the gated hitch pin keeps the rack secure. The Beta hitch rack is coated in a premium powder coat finish and is available in both the 2” and 1.25” hitch sizes. And, just like all of our products, the Beta hanging-style hitch rack for your car is covered by our No Worries Limited Warranty. We’ve got your rack and your back. - Anti-sway carriages - Quickly folds up for storage - Tilts down for vehicle access - Hand tight cam system - Gated hitch pin included - Aluminum construction

The RV Rider bike rack for RV's, motorhomes, and fifth wheels carries 2 E-Bikes (up to 80 lbs. each) on the back of an RV Motorhome, a 5th wheel, or a flat towed vehicle. Special features include universal heavy-duty wheel holders for heavy load carrying capacity. These wheel holders can fit any tire up to 5" wide and include a ratchet wheel strap. Locking frame grabbers secure the bikes in place. The frame grabbers can attach to a bike's frame or seat tube with a diameter range of 1"- 2", therefore Bike Adapters are not needed and should not be used. A locking cable and keyed alike hitch pin secure the bikes to the rack and the rack to the vehicle. The bike rack folds up when not in use and can tilt down for rear cargo access. A double-walled receiver tube handles the extra weight of the electric bikes. An included hitch tightener reduces motion inside the hitch (the receiver hitch must have a flange). A minimum class 3 trailer hitch is required to use this bike rack. - Capacity: Two Bikes (Max. 80 lbs per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy-duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame grabbers - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - Not intended for use with motorized gasoline bicycles, mopeds, motorcycles or 3 wheel bikes (trikes), or electric scooters - Rack Weight: 63.5 lb - Limited Lifetime Warranty

Specifically designed to handle the tremendous forces on the back of an RV/travel trailer, this carrier is durable, protective and secure. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7” of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Carrier locks to the RV with the Thule STL2 bolt (lock included) Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 36 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 32-inch - Fits Thule AeroBlade - Fits Thule SquareBar

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Custom-fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fit kit for vehicles with flush railings - Comes as a package of four and helps attach a complete roof rack system to your specific car - Compatible with Thule Evo Flush Rail and Thule Edge Flush Rail foot packs

High-grade bike lock developed with ABUS High-quality lock for added security and protection against theft, developed with ABUS. The robust cable has a length of 150 cm and a thickness of 1,2 cm. The lock is compatible with both the two-bike and the three-bike carrier. Maximum security High grade bike lock with loop cable offers added security High quality bike lock for your bikes Developed with ABUS Easy to install Tool-free installation of lock to bike carrier

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Thule Epos bike rack fits all types of bikes and is fast, easy, and convenient to use – it takes minimal effort to mount bikes thanks to an innovative telescopic bike attachment system. The bike arms simply let you attach your bike anywhere on the frame or the rear wheel, providing you with numerous attachment options. You can load and unload up to three bikes in any order – all types of frames and geometries are supported, including ebikes, mountain bikes, gravel bikes, and bikes with fenders and racks. - Fast and easy loading and unloading of all types of bikes and ebikes. The patented telescopic bike arms with pivoting cradle and steel reinforced straps attach to the bike frame or rear wheel - The high load capacity of 75 lb/bike makes it possible to transport heavy ebikes - Generous 9.8 in distance between bikes reduces risk of bike-to-bike contact - Extra-long wheel holders enable easy transport of bikes with long wheelbases, up to 53 in - Ratcheting pump buckles and wheel straps for easy fastening of tires up to 3.2” (up to 5” tires with a separately sold accessory) - Fully foldable for convenient installation, handling, and storage - With bikes mounted, the trunk is accessible with a smart foot pedal tilt. Without bikes, the trunk is accessible without tilt - Max bike carrying weight 140lbs

- Secures to any surface - Versatile fork mount block that secures to any flat surface and works with 9mm quick release forks and most thru thru-axle bikes. - Fork mount bike block mounts to any flat surface including pick pick-up truck beds - Securely transport bikes with 9mm quick release forks and thru thru-axle diameters 12x100, 12x110m, 15x100, 15x110 - Fork mount design clears disc brake calipers

For rides long or short, bring your bikes with ease. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Effortlessly fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.2 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 34 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 1.25" receivers - Fits 2" receivers

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. Features - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Loading width: 50-inch - Length: 50-inch - Maximum load: 220-pound. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.

Premium hanging hitch bike rack providing superior bike protection and multiple size options to fit the needs of two people or an entire family. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easy to carry and handle, thanks to integrated grab handle - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 37 in - Folded dimensions: 15.4 x 11 x 37 in - Weight: 35 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)

Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.

A premium aluminum platform bike rack is fully lockable, easy to use, and holds bikes without frame contact. Features: - Quickly attach bikes and easily secure them to the rack using the ratcheting wheel loops - Aluminum construction makes it easy to use, install and remove - Effortlessly fold down bike arms when the rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down, even with bikes on it - Lock bikes to the rack using the integrated cable lock (lock included) - Fits 26"-29" wheel sizes up to a 3" wide tire - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included)

Functional, great-value roof box for the extra space you need. Features - Rugged and durable design is long-lasting and keeps contents protected during transit - Fast and secure fitting using only one hand thanks to FastGrip quick-mount system that assembles in moments - Passenger-side opening for easier loading and unloading - Central locking system provides maximum safety. The grip-friendly Thule Comfort key can only be removed if all locking points are securely closed Technical specifications - Volume: 14 cu ft - External dimensions: 67 x 35 x 16 inch - Internal dimensions: 61 x 33 x 14 inch - Height off crossbar: 16-inch - Load capacity: 110-pound - Mounting system: FastGrip - Weight: 34-pound - Locking system: Central lock - Locks included - One Key System compatible - Load capacity skis (pairs): 3-5 - Load capacity snowboards: 3-5 - Max length of skis: 155 cm

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Features - CustomAdjust Bar Height provides maximum carrying versatility for easy loading, carrying and storage - Integrated AirTrip bar technology redirects airflow for superior aerodynamics - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - Included tool-free load stops help secure oversized loads - Installation requires no cutting or drilling and only limited assembly - SecureLock locks the rack to the truck with four One-Key lock cylinders (included) Tech Specs - Dimensions: 16 x 71 x 29 in - Maximum load: 450 lb/204 kg. Please also check the maximum roof load capacity of your vehicle.

Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in

Carry 2 bikes in the bed of your pick-up truck with no bolting or drilling with this integrated locking fork mount carrier Features -Aluminum telescoping bar with SoftGrip™ rubber feet hold carrier on side rails of full size and small pick-up trucks without drilling (compatible with most bedliners) -3 One-Key lock cylinders included to lock the bikes to the carrier and the carrier to the truck. -Fits full size and small pick-up beds (compatible with most bed liners) -Carries 2 bikes. More bikes can be fit with the Bed-Rider Add On Block (#BRLB, sold separately)

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.

Premium hanging hitch bike rack providing superior bike protection and multiple size options to fit the needs of two people or an entire family. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 5.5" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easy to carry and handle, thanks to integrated grab handle - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 5 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 37 in - Folded dimensions: 15.4 x 11 x 37 in - Weight: 35 lb - Distance between bikes: 5.5 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

The fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. Thule EasyFold XT 2 hitch bike rack is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for a wide range of bikes and e-bikes. Loading heavy bikes is effortless and with the optional loading ramp, it’s even easier. This durable bike rack also gives you full access to the trunk even when bikes are loaded. Fold the bike rack to a compact size and stow it in your trunk, perfect for an impromptu bike adventure. For unusual bike geometries or oversized frames, bring your bike to one of our Thule dealers and test it out. Features: - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into the rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in the receiver and locks the hitch rack to the vehicle

Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.

Thule Epos bike rack fits all types of bikes and is fast, easy and convenient to use – it takes minimal effort to mount bikes thanks to an innovative telescopic bike attachment system. The bike arms simply let you attach your bike anywhere on the frame or the rear wheel, providing you with numerous attachment options. You can load and unload up to three bikes in any order – all types of frames and geometries are supported, including ebikes, mountain bikes, gravel bikes, and bikes with fenders and racks. - Fast and easy loading and unloading of all types of bikes and ebikes. The patented telescopic bike arms with pivoting cradle and steel reinforced straps attach to the bike frame or rear wheel - The high load capacity of 75 lb/bike makes it possible to transport heavy ebikes - Generous 9.8 in distance between bikes reduces risk of bike-to-bike contact - Extra-long wheel holders enable easy transport of bikes with long wheelbases, up to 53 in - Ratcheting pump buckles and wheel straps for easy fastening of tires up to 3.2” (up to 5” tires with a separately sold accessory) - Fully foldable for convenient installation, handling, and storage - With bikes mounted, the trunk is accessible with a smart foot pedal tilt. Without bikes, the trunk is accessible without tilt - Fully functional and integrated lighting kit with modern styling, specifically designed for Thule Epos for increased visibility in all lighting and weather conditions - Max bike carrying weight 140lbs

What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.

Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings.

Easy-to-install foot for Thule Evo roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Evo roof racks systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Check the Thule Buyer's Guide to find out which roof rack fits your car - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Maximum load: 220 lb. Please also check the maximum roof load capacity of your vehicle.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.

For rides long or short, bring your bikes with ease. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7” of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates a wide variety of bike sizes/frame styles - Effortlessly fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easily transfers between 1.25” and 2” hitch receivers Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 28.3 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 28 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 1.25" receivers - Fits 2" receivers

Whether you’re an RV full timer, enthusiast or someone with a 2” receiver, the SuperClamp HD has your bike transport covered. This heavy-duty hitch rack features all the same specs as our top-selling SuperClamp EX, including dual wheel-clamping hooks and tilting capabilities. - all built on a dedicated 2” receiver base. Proven to stand up to miles on the road, this RV compatible hitch rack is as rugged as they come. Life with the RV just got a little better. - Platform style hitch rack. - RV Compatible: Class A, B & C motorhome. - For use with 2” receivers only. - Two shepherd's hooks hold bike by top of both wheels -- does not touch the frame of the bike. - Sleek, compact and lightweight design transports two bikes on a single bar. - Adjustable arms and wheel trays fit almost any type of bicycle, including those with fenders, mountain bikes and eBikes; bike spacing accommodates widest combination of bicycles. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Tilting feature allows access to rear of vehicle, even when fully loaded, and folds up when not in use. - 3 position arms pivot on case hardened brackets for superior strength. - Bottle opener integrated into tilt handle. - Built and tested to outlive the elements. - Universal wheel trays with robust metal insert accommodate a wide variety of bikes and wheel sizes (up to 4” tires). - If used with Fat Tire Wheel Holders, rack is no longer RV compatible. - Approved for use on RVs. - Not approved for use on tow-behind trailers.

Premium hanging hitch bike rack providing superior bike protection and unobstructed access to the rear of vehicle. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Easily fold down bike arms when rack is not in use - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Convenient access to the rear of the vehicle, even with bikes attached, due to the patented swing-away design - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily opens and closes with the pull of a pin Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.2 x 11 x 40.2 in - Folded dimensions: 15.2 x 11 x 40.2 in - Weight: 42 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

Freedom is a versatile lightweight rack that makes loading and unloading bikes quick and easy. Foldable upright arms securely clamp top or seat tubes with soft, non-marring pads. - Ratcheting straps keep bike stable and secure and adjust to fit most bikes - Standard wheel scoop fits up to 2.25" tires. Fat wheel trays are available separately - Adjustable to work with most bikes - Fits 1 1/4- and 2-inch hitches - Can hold two bikes weighing up to 60 lbs each - Rack weighs 20 lbs - Made in the USA