Blackburn's Sweat Net protects your precious bicycle and components from the corrosive effects of perspiration as you log indoor miles. It's made of washable terry cloth and fits most bicycles.
- Stable front wheel stand - Slots for 700c, 650c and 26-inch wheels - Use with Trakstand Mag 3 to level bike - Use with other trainers to raise handelbars
Train In Comfort Use this nifty device to keep your ride comfortable. When placed under your front wheel, this block raises the front of the bike by approximately 2.75” (70mm) to give you a more level and stable platform for your workout.
In the Tech Mag 1, Blackburn delivers a high quality trainer that lives up to the production and quality standards of the brand, yet is simple, easy to use and affordable. - Single resistance setting for no-fuss operation - Compact, lightweight and foldable design - Rubber feet micro-adjust for extra stability - Includes steel quick release wheel skewer so that your original equipment does not get scratched - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - 6713g / 14.80lb Dimensions: -Length 550/550mm/21.7/21.7in -Width 550/480mm/21.7/18.9 -Height 415/160mm/16.3/6.3in
Everything You Need To Train Today Start training now with this complete trainer kit that includes our fantastic tech mag 5 trainer plus a trainer mat and block. The included trainer mat protects your floors from scratches and sweat. And the trainer block levels your bike for comfort and stability. - No assembly required. - Bike installation is simple and works with many wheels sizes from 26" X 1" to 29" X 2.3". - Nine resistance settings across a broad range of levels - QR skewer included to minimize damage or scratching of original QR
Blackburn's Fluid Trainer features a revolutionary frame design that allows you to quickly install nearly any type of bike with minimal adjustments. There is no need to adjust the tension of the roller on the tire; it's always right, just like when you ride. - Compact, lightweight and foldable design - Fastcrank mounting system allows for simple and quick installation - New resistance unit is quiet, consistent, and smooth, and will never leak oil - Compact, lightweight and foldable design - Includes Trakblok 3 - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - Optimized resistance curve based on years of research
This race-ready fluid trainer folds up and packs into a carrying case about the size of large Chihuahua. Weighing in at under 15 pounds, this might be the most portable fluid trainer on the market and is perfect for race warm ups, training and interval classes, or if you haven't yet put a down payment on that mansion and need the space in your apartment. Features: - Dual Fluid Resistance: Each of the two rollers on this trainer have built in fluid technology, that add up to 650 watts of smooth and quiet resistance, making sure your workout is as tough as you want it to be. - Telescoping: The legs and wheel base have telescoping adjustments to fit all sorts or sizes and breeds of bikes. - Axle Compatiblity: This trainer works with standard 9mm front QR axles, and includes adapters for 12 and 15mm through axles, accommodating 100 and 110mm widths. - Wheel Compatibility: Compatible with most road and mountain bike wheels sizes. This includes the following diameters: 24", 26", 650b, 700c, 27.5" and 29" and widths from 23c up to 2.3". - Super Quiet: Designed to not wake up sleeping babies or anyone else in the house. Details: - No assembly required - Includes storage bag
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Leveling block for indoor trainers
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
CycleOps' 20-/24-inch Wheel Adapter allows you to attach your BMX or recumbent bike to your trainer (sold separately). The adapter raises the resistance unit up for smaller wheels. It's compatible with CycleOps' Wind, Mag, Mag+, Magneto, and Fluid² trainers.
When you need to transport your trainer, CycleOps' Trainer Bag is the most convenient solution. There is no need to worry about your trainer getting damaged when it's safe and secure on the way to your race or event.
- Adapts a thru axel hub bike for a trainer. - Only compatible with current classic series trainers. - Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch - Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
Use CycleOps' Training Mat to protect your floors and carpets from bike grime, sweat, and trainer wear. Durable and water proof, the Training Mat helps keep your trainer from moving across the floor and it absorbs vibration and noise.
With CycleOps' Rollers Fork Stand anyone can ride rollers! Just attach this little beauty to your rollers, clamp your fork in place, get on and ride. It's that simple. The Fork Stand mounts directly to the frame of your rollers for excellent strength and stability. No balancing is necessary, so you can watch television or read while riding your rollers!
CycleOps' Roller Resistance Adapter offers five different levels of magnetic resistance. And, with its ingenious resistance system, which doesn't use any moving parts, it's virtually silent!
Create your own at-home cycling studio with CycleOps' Trainer Accessory Kit. CycleOps equips you with three RealRide DVDs, a trainer tire, and two climbing blocks so you can sprint and climb your heart out. A bike Sweat Guard and Trainer Mat keep your equipment and home like new.
CycleOps' Wind Trainer provides all the cardiovascular exercise you can handle. Heavy die-cast zinc fan blades double as a flywheel for smooth, progressive resistance. The faster you pedal, the harder your workout... just like riding your bike on the open road.
CycleOps' Mag+ Trainer with Adjuster uses magnetic fields to generate a wide range of adjustable resistance, great for cyclists determined to stay in shape year round. Its unique design incorporates a flywheel for a smooth, quiet ride. Choose from 5 resistance settings for varied workouts. Plus, the bar-mounted remote shifter means you never break your cadence.
CycleOps' Magneto is an innovative training tool to keep you fit, trim, and ready to ride no matter what the weather is like outside. It offers progressive resistance, which means the faster you go, the quicker the resistance ramps up, just like the real world. There is no adjustment necessary, and the resistance level automatically changes to give you a smooth, quiet ride. Plus, the frame is tough, sturdy and stable so you can ride as hard as you want.
Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers. The durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily adjusted wheelbase and a limited lifetime warranty.
CycleOps' Fluid2 Trainer utilizes Power Band technology to allow for distinct resistance changes without reaching to a lever on the unit. The large flywheel with fluid resistance delivers a smooth, realistic road feel while sturdy legs provide a stable platform for pumping out hard, 600-watt efforts and out-of-the-saddle climbs. A favorite among serious racers, the Fluid2 is easily transportable and stands up to repeated punishment by the burliest of legs for years of impressive performance.
A KILLER TRAINING COMBO What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+ and voilà! - you’re ready to sweat. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling bike trainer in the USA. - Included speed sensor connects you with Rouvy, Zwift, and other virtual training apps. - ANT+ USB and BlueGiga USB sold separately. In the box: - Fluid2 Smart Equipped Bike Trainer - PowerTap dual-band magnetless speed sensor - Front wheel leveling block - PowerTuned for optimal road-like feel. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the CycleOps foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes—up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Trainer tire recommended. - Compatible with virtual training apps. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes.
Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers with Resistance. Five levels of resistance allow you to knock out hard efforts and the durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily-adjusted wheelbase and a limited lifetime warranty.
CycleOps’ JetFluid Pro Trainer is your secret weapon. Use it whenever time or weather constraints arise so you can stamp your authority on the hills, races or group rides next time the sun shines. The Pro features progressive resistance, where just like the real world, resistance builds the faster the wheel spins. Charging through 600-watt intervals or spinning easily in the little ring requires no adjustment; the power curve automatically changes to give you a silky-smooth workout. Plus, the Fluid is whisper quiet and the frame is tough, sturdy and stable so you can ride as hard as you want.
CycleOps’ SuperMagneto Pro Trainer offers smooth road-feel and four magnetic settings for dialing in the exact real-world simulation your workout calls for. The easy setting is ideal for warm ups and easy days. The road mode is tailored for high-volume rides. You can throw down with the interval setting, while the mountain mode lets you crank out intense hill workouts. Each setting has progressive resistance, where just like riding outside, resistance builds the faster the wheel spins. Plus, the frame is tough, sturdy and stable so you can ride as hard as you want.
CycleOps’ JetFluid Pro Trainer Kit is your secret weapon. Use it whenever time or weather constraints arise to stamp your authority on the hills, races or group rides next time when the sun is shining. The Pro features progressive resistance, where just like the real world, resistance builds the faster the wheel spins. Charging through 600-watt intervals or spinning easily in the little ring requires no adjustment; the power curve automatically changes to give you a silky-smooth workout. Plus, the Fluid is whisper quiet and the frame is tough, sturdy and stable so you can ride as hard as you want. Two Climbing Riser Blocks are stack-able to simulate steep grades, while a Training Mat and a bike Sweat Guard protect your equipment and floor. Included in the box: • JetFluid Pro trainer • 2 climbing riser blocks • Training mat • Sweat guard • Quick release skewer • Instruction manual
CycleOps’ SuperMagneto Pro Training Kit offers smooth road-feel and four magnetic settings for dialing in the exact real-world simulation your workout calls for. The easy setting is ideal for warm ups and easy days, the road mode is tailored for high-volume rides, you can throw down hard with the interval setting and the mountain mode lets you crank out intense hill workouts even when the weather outside is nasty. Each setting has progressive resistance, where just like riding outside, resistance builds the faster the wheel spins. The frame is tough, sturdy and stable so you can ride as hard as you want. Two Climbing Riser Blocks are stackable to simulate steep grades, a RaceDay training DVD keeps you motivated, and a Training Mat and Sweat Guard protect your equipment and floor.
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And thanks to integrated speed, cadence and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the CycleOps foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0 tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended. - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately. - Not compatible with CycleOps 20/24" wheel adapter. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes.
Look forward to trainer time every time. CycleOps’ PowerBeam Pro Trainer transports you to rowdy city streets, desolate forested mountains, Swiss Alp Tour stages, and palm-lined beaches in the dead of winter. The smooth, supple road-feel, out-of-the-saddle stability, VirtualTraining and power measurement with +/-5% accuracy give you the ultimate tools to get the most benefit and enjoyment out of trainer workouts. Wireless Bluetooth technology allows you to track your effort on your favorite compatible device. Closed loop resistance allows you to choose a power output or slope and drill it for as long as the segment demands. With VirtualTraining you have the globe at your disposal to create and ride pre-existing, exciting routes and race against others; the possibilities are almost endless.
No matter your training category, the H2 is the perfect addition to any athlete’s toolbox. From weekend warriors to pro-podium chasers, mountain bikers to triathletes, this smart direct drive trainer is versatile enough to push any training regimen to the edge. The heart of the H2 is its ability to replicate real world inertia better than anyone else thanks to it its massive, 20-pound precision-balanced flywheel. The H2’s soul is its impressive electrical prowess, complete with integrated cadence, speed and power data, internal cooling, over-the-air firmware updates, dual-band ANT+ and Bluetooth compatibility and topped off with its electromagnetic resistance system for rapid resistance changes within virtual training environments. Plus, at 64 decibels the H2 is library-level quiet - even if your next virtual victory may not be. - Noise level at 20 mph is 64 decibels, quiet enough to ride in a library. - PowerTuned using PowerTap technology for up to +/- 2% accurate power readings. - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Compatible with a wide variety of devices and virtual training application, including Rouvy, Zwift, TrainerRoad and many more. - - - - - Contact us with questions about compatibility with other software. - 20 lb precision balanced flywheel provides quiet, vibration free and true-to-the-road riding experience. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 2000 watts at 20 mph and can simulate up to a 20% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Integrated front wheel tray adds stability to ride without taking up any extra storage space. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Built-in front wheel tray adds stability to ride and nests within the trainer when not in use. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Includes a Shimano splined freehub for compatibility with Shimano 8-11 speed cassettes. XD freehubs are also available and sold separately. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates via Bluetooth ensures the H2 is up to date with all the latest features. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Dimensions when Open L*H*W: 31” x 18.5” x 19.5” (787.4 x 469.9 x 495.3 mm). - Dimensions when Closed L*H*W: 8.5” x 18.5” x 19.5” (76.2 x 469.9 x 495.3 mm). - Weighs in at 47 lb. (21.3 kg). - ANT+ and BlueGiga USB dongles sold separately. - Cassette not included. - Zwift certified.
Power fluid resistance unit - Oversize elastogel roller reduces noice by 50% and tire wear by 20%, improves tire grip. - Fast fixing blocking mechanism. - "AutomaticTension Plate”: a system that maintains the correct pressure between the unit, roller and tire throughout training sessions. - Fits from 24- to 29-inch wheels. - Compatible with app My E-training = unlimited level mode and 12 months free subscription. - Pack includes: training mat and travel block.
Giant's Chopping Block lifts your front wheel so it's even with your rear wheel while on a trainer. It's compatible with 26-inch and 700c wheels and has a stable, anti-skid base.
Giant's G-Thang keeps corrosive sweat from harming your bike during an indoor training workout. It's made from soft, absorbent, washable terry cloth and is attached to your handlebars and top tube via elastic and Velcro straps.
Giant's Cyclotron Chopping Block supports and lifts your front wheel so you ride a level bike when you're on a trainer. It holds 700c and 26-inch wheels and has a stable, anti-skid base. It's made of ABS plastic for strength, low weight, and durability.
Giant's Training Mat is the best way to protect your floor from those hard trainer sessions. It covers the entire area, keeps your carpet sweat-free, protects the floors from scratches, and helps damp the noise. Made from rubberized material, it's anti-skid, rolls up easily and hoses right off. A mesh carrying bag with shoulder strap is included.
- Quiet magnetic unit with 7 resistance levels activated by handlebar mounted thumb shifter - Handlebar mounted, 7-level thumb shifter, quickly mounts on handlebars from 22.2mm (7/8") up to 31.8mm (1 1/4") - Precision–turned 2" aluminum roller and 1500g (3.3lbs) flywheel - Heavy-duty, 100% steel, TIG welded frame with wide stance and tough powder coating that looks great and resists rust - Non–skid rubber adjustable leveling feet - Tough steel replacement quick-release skewer included - Accommodates most 24", 26", 700C, and 27" wheel/tire sizes
- Progressive magnetic resistance automatically gives a wide range of resistance from easy spins to burning climbs with no remote adjuster - Non–skid rubber adjustable leveling feet - Precision–turned 2" aluminum roller and 1500g (3.3lbs) flywheel are mounted to a stiff, die–cast aluminum carrier for smooth pedaling action - Tough steel replacement quick-release skewer included - Accommodates most wheel/tire sizes 29", 27", 700C, and 26"
- Real Road Simulation (RRS) technology provides up to 2000 watts of quiet, smooth, progressive resistance - TurboTron 70mm alloy roller with internal cooling fins reduces heat build up and prolongs tire life - Steel frame - Accommodates most wheels from 24" to 29" - 7.5lbs flywheel for improved road feel
- Real Road Simulation (RRS) technology provides up to 2000 watts of quiet, smooth, progressive resistance - TurboTron 70mm alloy roller with internal cooling fins reduces heat build up and prolongs tire life - F4 fluid formed alloy frame provides incredible stiffness - Dial-adjust anti-skid feet keep your trainer stable and your floors clean - Accommodates most wheel from 24" to 29" - 7.5lb flywheel for improved road feel
- Real Road Simulation (RRS) technology provides up to 2000 watts of quiet, smooth, progressive resistance - TurboTron 70mm alloy roller with internal cooling fins reduces heat build up and prolongs tire life - F4 fluid formed alloy frame provides incredible stiffness - Dial-adjust anti-skid feet keep your trainer stable and your floors clean - Accommodates most wheels from 24" to 29" - Pre-loading coupler and torque set knob allow for easy bike installation and removal - 17.6lb flywheel for improved road feel - Includes riser block
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Kurt's Small Wheel Adapter attaches to your Kurt Kinetic trainer and raises the resistance unit so you can use your trainer with small-wheeled bikes. This adapter works with bike wheels as small as 16 inches in diameter. Comes in two varieties to work with both old and new Kurt Kinetic trainers. • T-580 Small Wheel Adapter for use with all 2013 and newer trainer models. • Old trainer style uses T-500
Kinetic's Trainer Mat is a simple necessity for any cyclist who cherishes a clean training environment. It keeps floors clean and sweat-free and reduces vibration. Durable closed-cell PVC foam means it will stand up to even the most intense training sessions.
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
$17.95 - $19.95
- Replacement belt - Select model based on model/roller size and belt size
- Combine roller frame with roller kits to create a unique, Professional level trainer - Standard frame designed for 4.5", 3.0" And 2.25" Rollers and fits wheelbases from 31.5" To 48.5" - Additional fan-Resistance and fork stand stabilizers available separately for standard frame only - Kompact frame is a lighter and more portable option designed for 3.0" And 2.25" Drums and fits wheelbases from 38" to 42"
The Blue Twist is streamlined and simple, featuring the performance Tacx's Blue trainers are known for, but without a handlebar resistance lever. You manually set the resistance, selecting one of the seven positions using a switch on the brake. The maximum resistance is 700 Watt. The Blue Twist is suitable as an entrance model. Software: PC/laptop - Operation: Switch on brake Resistance: unit Magnetic Braking positions: 7 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheel diameter: 26"- 29" and 700c; 29" with trainer tyre
The Blue Matic is the intermediate model of Tacx's Blue cycletrainers. Its maximum resistance is 700 Watt. The Blue Matic has a magnetic brake with permanent-magnets. You set the resistance selecting one of the ten different positions via the handlebar resistance lever. During your training session the resistance increases as you cycle faster or switch to a heavier setting. The robust frame stands firmly on the ground and it is very user friendly because the trainer can be assembled in no time at all. Software: PC/laptop - Operation: Handlebar resistance lever Resistance: unit Magnetic Braking positions: 10 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter: 26"- 29" and 700c; 29" with trainer tyre
Do you want to work on your rhythm, make your muscles more flexible or refine your coordination and technique? Then use the Antares rollers. You can cycle freely, just like on the road or track. If you find it difficult to cycle unsecured you can use the Antares bracket. The Antares is collapsible and is easy to transport. Some cyclists keep finding it hard to ride without a restraint. They choose the Tacx Antares and use the support for Antares to secure the bike, without the front wheel, and still cover the mileage in front of them. Riding on ‘the Tacx’ is a relatively easy way to up your track pace and make your muscles more supple. This makes for completely natural movements. You keep pedalling from the hips, just as you would on the road or track. A high pedalling frequency, that is needed for the right feeling in the legs, is also possible. The Tacx Antares is the official warming-up trainer at the 2012 Olympic Games.
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
Prepare yourself in a professional manner and get your body in top condition with the Booster, the top model of the Tacx cycletrainers. Even at low speed the powerful magnetic brake generates high resistance; the maximum resistance is 1050 Watt. This makes the Booster highly suitable for simulating climbs and for interval training with short, intense sprints. The handlebar resistance lever allows you to set the level of resistance by selecting one of ten different positions. The brake is easy to assemble so you can get started straight away. The professionals with whom Tacx cooperates use the Booster for warming up for time-trials and other important stages. ‘‘The Booster gives me the same feeling like I have on the road”, says multiple time-trial world champion Tony Martin. Software PC/laptop - Operation Handlebar resistance lever Resistance unit Magnetic Braking positions 10 Descent simulation - Max brake power (10 sec.) 1050 Watt Sprint power (1 min.) 900 Watt Mass inertia 9,18 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
The Galaxia takes you as close as possible to the natural road cycling experience, the rollers namely move along with you. You can perform sprints, extend your legs and stand on the pedals without the fear of falling off. Your movements are more free because you get close to the natural road cycling experience. When accelerating, the Galaxia rollers move forward as a result of the kinetic energy that is created and they move backwards when you slow down. With this patented ‘swing system’ you can work on your speed and suppleness without any concerns. The Galaxia is collapsible and easy to transport. The Tacx rollers have a state of the art design. Thanks to the conical rollers your ride is extra stable, so you can focus even more on your goals in training: improving your fitness and pedal stroke and maintaining your speed. Many worldclass riders don’t go anywhere without their Tacx rollers. During their warm-up and training sessions they use the rollers to maintain their speed and suppleness, essential tools for a track cyclist. Road cyclists increasingly use the rollers to cool down after a race. The bike doesn’t have to be attached to the trainer, as with the Booster, and the rollers run lighter so you can pedal more relaxed. This is perfect for a good cool-down after a long and strenuous exercise.
The Satori Smart trainer uses complex technology in a user-friendly fashion. The resistance is set manually with the handlebar resistance lever offering 10 different resistance positons, from very easy to very strong. The Satori Smart can communicate via both ANT+ as well as Bluetooth® Smart. In the resistance unit an accurate measurement of your speed, cadence and power is performed. This data is then shown on the screen your using, whether this is a tablet, smartphone, sportwatch, or something else. During or after a training session you, or your coach, can thus monitor your performance closely. Since the Satori is not hooked up to the power net, you can use this trainer anytime and anywhere, also when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Handlebar resistance lever Resistance unit Magnetic Realistic slope 10 positions Descent simulation No Max brake power (10 sec.) 950 Watt Sprint power (1 min.) 800 Watt Mass inertia 16.93 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Page 1 of 2 Next page