Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

All-City Utility Folding Knife
$39.99
Everybody needs a good knife in their backpack or tool kit. Here's a favorite of the All-City team, made by the fine folks at CRKT. It's got a clip on one side, the AC logo on the other, and is good for spreading delicious jams, making dangerous arm movements, and of course, cutting things. - Open length: 6.5-inches - Closed length: 3.75-inches - Blade length: 2.625-inches - Weight: 3.1-ounces - Blade material: Stainless Steel - Edge type: fine - Handle material: steel - Knife type: locking folder
Alligator Shimano Reservoir Bleed Fitting
$9.90
- Replaces original Shimano bleed fitting with easy to use lever reservoir bleed fitting
Alligator Universal Disc Brake Bleed Kit
$63.90
- Features bleed fittings for Hope, Magura, Avid, Hayes, Formula and Gatorbrake - Includes bleed tubes, syringes, gloves, and handy carrying case - See BTI part number AX-9617 for Shimano bleed fitting
Atomlab Torque Nipple Tools
$3.90
- T-20 Torx L-wrench for pre-tensioning Torque nipples - 4.3mm wrench for tensioning Torque nipples via their wrench flats
Avid Elixir Pad Spreader Tool
$4.00
Brake pad spreader tool for Avid Elixir brakes.
Avid X0 Trail Pad Spreader Tool
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
Avid XX / Elixir Brake Lever Pivot Pin Press Tool
$27.00
- For removing/installing lever pivot pins in 2009/2010 XX and Elixir brake levers (2011+ brakes do not require pin tool)
Avid Disc Brake Bleed Kit
$41.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has the tools you need. Keep your Avid Juicy, Code, Guide or Elixir hydraulic discs running strong. Please note, DOT 5.1 brake fluid not included.
Avid Hydraulic Hose Cutter Tool
$51.00
- Hand-held hydraulic hose cutter - Quick, precise cuts - Works with all non-braided hydraulic hoses
Avid Disc Brake Bleed Kit
$53.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong.
Avid CODE Disc Brake Lever Parts 2007-2010
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
Avid Professional Disc Brake Bleed Kit
$70.99
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. And, this pro version is designed to stand up to heavy use with high-volume syringes and steel fittings.
Avid Pro Brake Bleed Kit
$88.00
SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
Avid Professional Disc Brake Bleed Kit
$88.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has the tools you need. This pro version is designed to stand up to heavy use with high-volume syringes and steel fittings. Keep your Avid Juicy, Code or Elixir hydraulic discs, or SRAM hydraulics running strong. Please note, DOT 5.1 brake fluid not included.
Bahco Hacksaws
$59.94 - $67.90
- Professional Ergo: features an ergonomic design with a high blade tension for straight accurate cuts (accepts 12" blade only). Alternative 55 degree blade mounting for flush cutting. Single touch spring loaded blade release mechanism for blade changes.
CDI Torque Products Preset Torque T-Handles
$39.16
- Prevent over-tightening of bolts to protect carbon fiber and other parts at critical junctions (Bar/Stem, Stem/Steer tube, Frame/Seat post) - 4mm bit is included with magnetic shank to interchange bits as needed - Rounded t-handle grip for added comfort in three different colors for easy identification - Includes certificate of calibration
CDI Torque Products Torqcontrol Torque Tool
$79.99
- Prevent over-tightening of bolts to protect carbon fiber and other parts at critical junctions (Bar/Stem; Stem/Steer tube; Frame/Seat post) - Adjustable from 2nm to 8nm indexing at every 0.1 (Tenth) of a newton meter - 1/4" Hex magnetic bit shank with 6 bits - Positive grip l-Handle design - Includes 4, 5, 6mm, T25 at 1" length and 4mm, T25 at 4" length
CDI Torque Products Torque Wrenches
$174.93 - $190.33
- Easy-to-read precision laser marked scales - Dual scales in English or Newton Meter units - An audible click indicates when the desired torque has been reached - All click torque wrenches are calibrated for use in both directions - Accuracy: +/- 4% cloc
CDI Torque Products Digital Torque Wrench
$413.03
- Digital readout torque wrench that displays real time torque values in any of four units (ft. lbs, in. lbs, Nm, kg.cm.) - Large easy to read digital display - 15 degree flex ratcheting push button socket release head that torques in both clockwise and counter-clockwise directions - Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound - 3 color LED light bar: yellow indicates approaching desired torque setting, green indicates desired torque value is reached, red indicates fastener was overtorqued - Accuracy: +/-2% CW of readings from 20% to 100% of full scale +/- 3% CCW of readings from 20% to 100% of full scale - N.I.S.T. traceable Certificate of Calibration included - Two CR123 Lithium batteries included
Campagnolo Ultra-Torque Hex Tool
$23.00
- Tool for removal and installation of the Ultra-Torque bolt - Fits 10mm Ultra-Torque bolts on all Campagnolo Ultra-Torque cranks
Campagnolo Disk Brake Mineral Oil
$27.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
Campagnolo Disc Brake Bleeding Kit
$44.00
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes -Does not include mineral oil - Fits Brand: Campagnolo - Hydraulic Fluid Type: Mineral Oil
Campagnolo Ultra-Torque Bottom Bracket Tool
$47.00
- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications
Cane Creek Double Barrel Adjustment Tool
$12.00
- Collar spanner, Nut wrenches and bottle opener for double barrel rear shocks
Cane Creek DB Bushing Hardware Tool - Assembly
$22.00
Allows safe installation and removal of Cane Creek Double Barrel bushings.
Cannondale SI BB Bearing Removal Tool
$11.00
- Tool required when removing Cannondale System Integrated, BB30, bearings - T-shaped tool for bearing removal
Cannondale Lefty Wheel Truing Dummy Axle
$30.00
- Wheel truing dummy axle and cap for Cannondale lefty forks
Continental Tire Levers
$1.95
Continental tyre levers made with fibre-reinforced plastic make changing tyres as easy as can be, without damaging the rim. The broad and flat lift surface also allows for perfect handling even on tight fitting tyres.
Crank Brothers Speedier Lever
$7.99 - $192.00
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Crank Brothers M5
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
Crank Brothers m10
$19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
Crank Brothers B14-Bit Multi-Tool
$27.99
Crank Brothers' B14-Bit Multi-Tool has a stainless steel frame with fourteen common tools needed for road and trail repairs: 2 flat and 2 Phillips screwdrivers, 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches, and a T10 and a T25 Torx head. It uses a magnetized bit socket that keeps the bit firmly in place. The bit holder locks closed, so everything's there when you need it!
Crank Brothers m17
$27.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Crank Brothers F10 Multi-Tool
$29.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25
Crank Brothers m19
$33.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Crank Brothers B17-Bit Multi-Tool
$34.99
Crank Brothers' B17-Bit Multi-Tool has a stainless steel frame with 17 common tools needed for road and trail repairs: 2 flat and 2 Phillips screwdrivers, 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches, T10 and a T25 Torx heads, and 2 spoke wrenches. It uses a magnetized bit socket that keeps the bit firmly in place. The bit holder locks closed, so that everything's there when you need it!
Crank Brothers F10+ California Edition
$34.99
Folding flat to fit almost anywhere, the Crank Brothers F10+ features ultra-fine finishing and 10 fundamental tools fixed inside a magnetic case, stamped with a California flag logo. Specs: - Case: Magnetized, built in bottle-opener - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Torx: T-25 - Warranty: 5 years - Weight: 94g
Crank Brothers F10+ Multi-Tool
$34.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - Magnetized storage case can be used as a handle for extra leverage - 5-year warranty
Crank Brothers F10+ New York Edition
$34.99
Folding flat to fit almost anywhere, the Crank Brothers F10+ features ultra-fine finishing and 10 fundamental tools fixed inside a magnetic case, stamped with NYC pride. Specs: - Case: Magnetized, built in bottle-opener - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Torx: T-25 - Warranty: 5 years - Weight: 94g
Crank Brothers F10+ Texas Edition
$34.99
Folding flat to fit almost anywhere, the Crank Brothers F10+ features ultra-fine finishing and 10 fundamental tools fixed inside a magnetic case, stamped with a Texas Star. Specs: - Case: Magnetized, built in bottle-opener - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Torx: T-25 - Warranty: 5 years - Weight: 94g
Crank Brothers F15 Multi-Tool
$42.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage
Crank Brothers F15 Syndicate Edition
$42.99
Folding flat to fit almost anywhere, the Crank Brothers F15 tool features ultra-fine finishing and fifteen fundamental tools fixed inside a magnetic case. Specs: - Case: Magnetized, built in bottle-opener - Chain tool compatibility: 8, 9, 10, 11, 12-speed - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Spoke wrench: #0, 1, 2, 3 - Torx: T-25 - Warranty: 5 years - Weight : 164g
Crank Brothers Y16 Tool
$49.99
- Shop quality tools use magnets to attach to the compact carrying frame - Features a CO2 inflator head and chain breaker - Driver bits attach to a 1/4" Driver on the Y-tool - Includes 2,2.5,3,4,5,6,8mm hexes, Torx T10 And T25, Phillips and flat screwdriver, spoke wrenches - 260G
DMR Pedal Bearing Tool V12
$29.90
- bearing tool for Vault, V18, or V14 models
DT Swiss Internal Nipple Wrench
$21.90
- Professional wrenches fit internal nipples on many deep section aero rims
DT Swiss Aerolite Spoke Holder
$23.90
- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Anodized red handle for easy truing and building
DT Swiss Spoke Freeze
$89.90
- Spoke thread treatment for DT-Swiss by Loctite - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
Eclypse Universal Disc Brake Bleed Kit
$34.99
- Universal hydraulic brake bleed kit - Fits Avid / Shimano / others - Kit includes Syringes (2), tubing, clamp and adaptors
Enduro Cartridge Bearing Puller Tool
$5.00
- Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats) - Effectively fits on cartridge bearings with 10-25mm inner race ID's
Enduro Universal Blind Hole Bearing Puller Set
$160.00
- Removes bearings from hubs and various other items - Works on bearings with an internal diameter of 8-32mm
Evo TRL-3 Tire Levers
$2.99
- For removal of tires from rims - High-strength ABS plastic
Evo CNT-1 Chain Tool
$6.99
- For removal (and installation) of chain link pins - Compatible with 7, 8, 9 and 10-speed chains
Evo PK-1 Inner Tube Patch Kit
$7.99
- Peel and Stick Patches (x6) - Metal scuffer
Evo CW-1 Chain Whip
$14.99
- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette
Evo PDL-1 Pedal Wrench
$14.99
- For installation or removal of pedals - Compatible with most pedal axles - Comfortable rubber coated handle improves grip - 15mm wrench size
Evo HWS-1 Hex Wrench Set
$15.99
- For use with majority of Hex bolts found on a bicycle - 2, 2.5, 3, 4, 5, 6mm Hex - Convienent storage carrier doubles as a handle
Evo AirPress Pressure Gauge
$16.99
- Big 2-inch pressure gauge - DualHead head fits Schrader / Presta - Bleed valve - 260 psi maximum pressure
Evo BBe-1 External Bottom Bracket Tool
$17.99
- For installation or removal of external bearing style bottom brackets - Compatible with most external bearing bottom brackets - Comfortable rubber coated handle improves grip - For 44mm external cups
Evo CNT-2 Chain Tool
$17.99
- For removal (and installation) of chain link pins - Compatible with 7, 8, 9, 10 and 11-speed chains - Comfortable rubber coated handle improves grip
Evo MMT-10m Mini Multi Tool
$17.99
- 2, 2.5, 3, 4, 5, 6, 8mm Hex, Phillps and Flat screw drivers, Magnet - Ultra compact and lightweight
Page 1 of 14 Next page